The Taos Basecamp Active concept starts with a 2022 Volkswagen Taos SEL 4Motion® and adds rugged Basecamp styling components and graphics package shared with the Atlas Basecamp Camping concept. Similar to the Atlas concept, the Taos concept features 17-inch fifteen52 Traverse MX wheels in Frosted Graphite, 225/55R17 all-terrain tires, and a lifted suspension with H&R springs and TRAK+ wheel spacers. Volkswagen Accessories on the concept include base carrier bars and bike racks, along with the Full Display Mirror, tablet holder, Muddybuddy floor liners, roadside assistance and first aid kit, Bumperdillo protection plate, and rear seat cover. In addition, a custom cargo divider and custom trunk flood lighting help keep gear organized and visible on the go. The Taos Basecamp Active concept is shown with Marin bicycles, bike helmets, and a fire extinguisher.
Blog
-
Volkswagen Atlas Basecamp Camping Concept
Featuring rugged Basecamp® styling components and a custom graphics package, the Atlas Basecamp Camping concept makes the outdoors more accessible. To get you where you want to go, the concept—based on a 2022 Volkswagen Atlas SEL VR6 3.6L 4Motion—adds an H&R® raised suspension, utilizing Street Performance Adventure Lift coilovers and TRAK+® wheel spacers. Custom floodlights and 17-inch fifteen52® Traverse MX wheels in Frosted Graphite are wrapped in 245/70R17 all-terrain tires to add an aggressive look to match the off-road styling of the Atlas concept.
To increase the versatility of the Atlas, the concept has a Volkswagen Accessories cross bar and Thule® Basket & Side Awning, as well as a prototype 2-in-1 Air Pump by NSV incorporated in the trunk area to inflate a camping mattress or sporting equipment. Other Volkswagen Accessories on the concept include the Full Display Mirror®, security console safe by Tuffy® Security Products, tablet holder, Muddybuddy® floor liners, roadside assistance and first aid kit, Bumperdillo® protection plate, and hood deflector. The Atlas Basecamp Camping concept is shown with an air mattress, camping lights, and a fire extinguisher.
-
Nissan reveals thrilling A-to-Z lineup of on- and off-road concepts for 2022 SEMA Show
Nissan will reveal six exciting new concept vehicles – plus the public debut of the all-new Z GT4 racing car – at the 2022 SEMA Show in Las Vegas, Nov. 1-4. Nissan’s diverse SEMA lineup includes electric, street/track performance and off-road-focused vehicles that will inspire owners to customize their own vehicles for next-level excitement.
Nissan’s Thrill Street exhibit in the Las Vegas Convention Center West Hall, booth #52141, will showcase the seven different vehicles, and two “parts walls” featuring off-road and street-focused NISMO accessory parts for owners to personalize their own vehicles. Keep reading for more on each of the SEMA show debuts.
Getting creative with EVs
As Nissan continues to pursue accessible electric mobility for all, the company, in partnership with Tommy Pike Customs of Greenville, S.C., is bringing two EV concepts to SEMA, providing inspiration as to how car enthusiasm can thrive in a future of electric vehicles.
Nissan Sunny LEAF project
Two different eras of Nissan vehicles collide at the 2022 Specialty Equipment Market Association (SEMA) Show with the reveal of a 1987 Sunny Truck that has been converted to LEAF all-electric power by South Carolina-based Tommy Pike Customs (TPC).
The 1987 Nissan Sunny, owned by TPC owner Tommy Pike, features the electric drive motor and 40-kWh lithium-ion battery pack from a Nissan LEAF. Rated at 147 horsepower and 236 lb-ft of torque, the LEAF motor has around twice the power and more than three times the torque of the gasoline four-cylinder engine originally equipped in the Sunny.
“I bought the Sunny Truck because I thought it was such a cool piece of Nissan history and heritage – especially when I saw it was a right-hand-drive model,” said Tommy Pike. “Taking the unexpected step of converting the Sunny to electric power while wrapping it with the Brock Racing Enterprises livery felt like the perfect way to pay homage to Nissan’s heritage and modern innovation.”
The complete list of modifications to the LEAF-powered Sunny includes:
- Nissan LEAF electric motor conversion with factory-original 56A manual transmission
- Custom CNC-machined motor-to-transmission bellhousing adapter
- “Hakosuka” Skyline widebody kit
- Aluminum battery box
- Custom driveshaft
- LED lighting conversion
- Heavy-duty rear leaf springs and suspension
- Nissan 240SX S13 front suspension conversion, including front coilovers, disc brakes and lower control arms
- Tommy Pike / Peter Brock collaboration custom Brock Racing Enterprises (BRE) “46” livery
- Custom user interface display designed by Clemson University ICAR
- TPC custom-designed and handcrafted interior with Laedana material by Tesca
- 17-inch Rotiform wheels
- 205/45/17 Toyo Extensa tires
Nissan Ariya Surfwagon concept
Designed to stoke dreams and inspire EV owners to personalize their vehicles to fit their lifestyles, the Nissan Ariya Surfwagon concept reimagines the 2023 Ariya, the company’s first all-electric crossover, as a California-style surf “woodie” wagon.
Created by South Carolina-based Tommy Pike Customs on behalf of Nissan, the Ariya Surfwagon immediately draws the eye with a custom vinyl wrap featuring wood paneling and chrome trim evoking beach cruisers of decades past. The Surfwagon features “smoothie” 20-inch wheels with polished stainless-steel center caps, white-wall tires, a custom roof rack holding two 7-foot surfboards and a custom lowered suspension.
The Surfwagon is intended to provoke conversation and imagination about what vehicle customization looks like in a future of electric vehicles, as owners seek to modify their EVs to suit their hobbies and preferred activities. The Surfwagon retains all the utility and functionality of a standard 2023 Ariya, yet with a look and purpose that is decidedly unique.
NISMO Off-Road Frontier V8 concept
The NISMO Off Road Frontier V8 concept takes the midsize truck to a new level of performance, ready for Baja-style desert running. In addition to stirring truck enthusiasts’ imagination about personalizing their own Frontier, the concept shows off a range of new NISMO Off Road accessory parts that will be available from Nissan dealerships soon, as well as some prototype NISMO Off Road parts that may be available in the future.
Built by Forsberg Racing, the Nissan Frontier concept1 features the 5.6-liter V8 engine sourced from a TITAN full-size pickup truck, equipped with a custom NISMO Off Road cold air intake and cat-back exhaust system. The truck also has a wide-track suspension created with lower control arms, front spindles, wheel hubs and rear axle from a TITAN. The suspension also features custom upper control arms and NISMO/Bilstein coilover shocks and custom rear leaf spring pack with NISMO/Bilstein external reservoir shocks for increased ride height and payload capacity.
To help accommodate the new, wider suspension, the Frontier concept received a custom wide body kit with carbon fiber front fenders, hood and bedsides, plus a prototype NISMO Off Road front bumper that improves the truck’s approach angle and tire clearance.
Additional components include:
- NISMO Off Road Axis 18 x 9 inch wheels with 295/70/18 mud-terrain tires
- Prototype NISMO Off Road rock rails
- NISMO Off Road roof rack
- Prototype NISMO Off Road in-bed spare wheel-and-tire carriers
- NISMO Off Road LED lighting
- Warn winch
Frontier Street Truck project
Nissan trucks have always inspired owners to personalize and customize their vehicles, and the latest Frontier midsize pickup is no exception. Content creator and automotive influencer Christina Roki created a lowered, street truck-style project1 for the 2022 Specialty Equipment Market Association (SEMA) Show.
Roki’s build is based on a 2022 Frontier King Cab S and takes the truck in a bold direction with a custom wide body kit from Performance Lab Detroit, along with a lowered suspension and other modifications, all recalling the look of the “mini truckin’” style of the past.
Find more on Roki’s Frontier project and her other automotive builds by following her on Instagram, TikTok and YouTube.
The truck’s full list of modifications includes:
- Performance Lab Detroit custom wide body
- Custom lowered suspension
- Terra Strada Design custom livery
- Black Rhino Kaizen wheels, 20 x 9.5 inches
- Bridgestone Potenza Sport tires, size 275/45R20
- MagnaFlow Street Series cat-back exhaust
- Tyger T3 bed cover
- Aerowerkz smoked headlights
- MC Whips tinted windows
- Custom Alcantara upholstery
- Custom graphic wrap designed by Bigtime Graphicss
NISMO Accessorized Z
The Nissan Z has long inspired fans and owners to modify the legendary sports car to their own personal tastes, and for the 2022 SEMA Show, the NISMO team created a 2023 Nissan Z to showcase a new range of performance-oriented NISMO accessory parts, which will be available for purchase through Nissan dealerships starting in early 2023.
The Z’s parts list begins with a NISMO coilover suspension kit with a twin-tube design featuring a linear race spring system, rebound damping adjustability and ride height adjustment. The suspension was developed with input from racing driver Bryan Heitkotter, who was crowned champion in the 2011 Nissan GT Academy competition and subsequently began a successful career racing for Nissan, and now Chris Forsberg Racing.
Additional suspension components include a NISMO adjustable stabilizer bar kit, prototype NISMO strut tower bar and NISMO suspension components including rear midlinks, rear lower camber links, rear traction arms, endlinks, front upper arms and front outer tie rod ends.
For increased stopping power, the car features a NISMO big brake kit that includes track-ready brake pads, larger vented front and rear rotors, 6-piston front/4-piston rear calipers and stainless-steel brake lines. Rolling stock is provided by new NISMO LM-RS1 wheels, 19 x 9.5 inches front and 19 x 10.5 inches rear. These wheels are lightweight, forged, and available in black, anthracite and bronze semi-gloss finishes to complement any vehicle color, and have been tested to rigorous NISMO standards. They are equipped with Bridgestone RE71RS tires, sized 255/40/19 front and 285/35/19 rear.
Enhancements to the 3.0-liter twin-turbo V6 includes a fully dyno-tested, CAD-designed NISMO cold air intake which uses a bell-mouth design to increase airflow. CARB approval is currently pending. For reduced charge air temperatures and to maintain performance on hot days and track events, a NISMO performance heat exchanger has been added – which features 148-percent greater volume than the factory piece.
A stainless steel NISMO track exhaust with a 2.25-inch outer pipe diameter reduces backpressure, while power is transmitted through a NISMO street twin-disc clutch and flywheel kit, designed to handle up to 800 horsepower and 750 lb-ft of torque while retaining a factory-like pedal feel and effort.
Visual enhancements on the car include NISMO carbon fiber exterior mirror covers, a NISMO fuel filler cover, NISMO kick plates, a NISMO GT titanium shift knob, a prototype NISMO carbon fiber steering wheel trim kit and, under the hood, a NISMO carbon fiber engine cover, NISMO coolant expansion tank a NISMO oil filler cap.
2023 Formula Drift Z
Three-time Formula Drift champion Chris Forsberg’s latest drift car, a 2023 Nissan Z modified to produce an incredible 1,300 horsepower, will appear at Nissan’s booth at the 2022 Specialty Equipment Market Association (SEMA) Show.
The Forsberg Racing team has an established connection with Nissan. The team used a 370Z for drift competition in the past, and worked with Nissan and NISMO to build its newest drift car this spring. The Forsberg Racing team equipped the Nissan Z with an extensively modified VR38DETT twin-turbocharged V6 engine – as found in the Nissan GT-R – re-tuned to make 1,300 horsepower and with exhausts exiting through the car’s hood. In addition, the team made significant chassis and bodywork modifications to prepare the car for Formula Drift, including adding required safety equipment.
The car made its competition debut at the Formula Drift Streets of Long Beach course in April, and Forsberg is currently 6th in the 2022 Formula Drift standings. Forsberg will be in attendance at the Nissan booth at SEMA to sign autographs and take selfies with fans.
Finally, Nissan’s SEMA booth will host the public debut of the Nissan Z GT4, a purpose-built racing car that will hit circuits in 2023 to continue to defend the Z’s long heritage of motorsports successes. The Nissan Z GT4 – and further information about Nissan’s 2023 racing season plans – will be revealed at a special event taking place at the Nissan booth during SEMA.
-
Hennessey Venom 1200 Ford Mustang GT500
Hennessey, the Texas-based hypercar manufacturer and high-performance vehicle creator has confirmed production for its new Venom 1200 Mustang GT500. Based on the most powerful factory-produced Mustang of all time, the Ford Mustang Shelby GT500, the latest Hennessey build will be one of the most powerful muscle cars Hennessey Performance has ever produced.
Ford Performance’s factory-stock Shelby GT500 boasts a hand-built supercharged 5.2-liter V8 rated at 760 bhp and 625 lb-ft of torque – it’s the most powerful factory engine ever dropped under the iconic pony car’s hood. Yet Ford still leaves much of the vehicle’s potential untapped.
The Hennessey Performance team in Texas, which has been ‘making fast cars faster’ for more than 30 years, seizes the opportunity. Its engineers make wide-ranging improvements to the factory setup to increase horsepower and torque considerably. These include a higher capacity 3.8-liter supercharger, a high-flow induction system, new fuel rails and injectors, and an air/oil separation system. In addition, fittings, lines, belts, and tensioners are upgraded, and the dual-clutch transmission is recalibrated for its high-output role. Lastly, the vehicle is calibrated on Hennessey’s in-house dynamometer, before being road-tested.
When the Venom 1200 leaves Hennessey Performance, its comprehensive upgrades and enhancements have unleashed a formidable 1,204 bhp and 902 lb-ft of torque – an astounding 58 percent increase in horsepower over stock.
John Hennessey, company founder, and CEO: “The stock Shelby GT500 is an extraordinary muscle car, but we take it to the nth degree with our Venom 1200. Our engineers were able to coax more than 400 additional horsepower out of the engine, which takes performance to supercar levels. Only a handful of vehicles in the world offer this level of power… especially at this price point.”
Priced from $59,950 – exclusive of the base Ford Shelby GT500 – the Venom 1200 package offers comprehensive professional upgrades to the stock 5.2-liter V8 engine, unique exterior badging, and a special serial-numbered plaque. Only 66 examples of the Venom 1200 will be built globally. Owners will have the choice of adding the historic 1966 24 Hours of Daytona Ford Mark II GT40 red, white, and black livery to their build (an optional upgrade priced at $4,950 and shown on the vehicle in the press images).
Hennessey prides itself on the reliability of its vehicles and the quality of its workmanship, backing up every Venom 1200 transformation with its comprehensive 1-year / 12,000-mile warranty. The new Hennessey Venom 1200 is available for international shipping now through authorized Ford retailers or directly from Hennessey by calling +1 979.885.1300 or visiting HennesseyPerformance.com.
Specifications: Hennessey Venom 1200 Mustang GT500
POWER BADGING 1,204 bhp @ 7600 rpm * Hennessey Exterior Badging 902 lb-ft torque @ 5200 rpm * Venom 1200 Exterior Badges (*Full power requires E85) Serial Number Plaque Limited Edition (66 units) UPGRADES TO STANDARD 5.2-LITER V8 OTHER 3.8-liter Supercharger Professional Installation High-Flow Induction Upgrade Chassis Dyno Tuning & Road Testing Upgraded Heavy-Duty Supercharger Belt 1-year / 12,000 Mile Limited Warranty Upgraded High-Flow Fuel Injectors Upgraded Anodized Billet Fuel Lines OPTIONAL UPGRADE Upgraded Heavy-Duty Tensioner 1966 24 Hours of Daytona Livery Air/Oil Separation System POWERTRAIN MANAGEMENT Upgraded Flex Fuel Engine Calibration Upgraded Transmission Calibration -
Three Top Tuners Showcase the Personalized Performance Potential of the 2023 Acura Integra
Acura has partnered with three of the nation’s top tuners to showcase the personalized performance potential of the next-generation Integra and celebrate the return of the iconic Integra nameplate to the Acura lineup. Inspired by Acura’s unyielding commitment to performance and the tuner community, Daijiro “Dai” Yoshihara, Sara Choi and Coco Zurita have created personal interpretations of their ultimate 2023 Acura Integra, adding supreme levels of style, power and performance.
Following a public debut at the Acura Integra-sponsored Pit+Paddock “Drive In” at The Petersen Museum on Oct. 23, all three project Integras will be displayed at various upcoming auto industry events including the SEMA Show (Nov. 1-4), RADwood LA (Nov. 19) and Acura Grand Prix of Long Beach (April 14-16).
Dai Yoshihara’s Integra, Built by Evasive Motorsports
Based in Southern California, Daijiro “Dai” Yoshihara is a professional driver from Tokyo, Japan with notable motorsports accolades including a Formula Drift championship and class wins at the Pikes Peak International Hill Climb, 25 Hours of Thunderhill, Global Time Attack and Super Lap Battle. Dai’s motorsports roots are clearly reflected in his project Integra, which includes a full roll cage, racing seats, adjustable suspension and racing slicks.
“Growing up in the 80’s and 90’s, Integra was always one of my favorite Acuras so it’s such an honor to get to build a brand new 2023 Integra,” said Dai Yoshihara. “I wanted to take the sporty theme from the iconic DB8 Integra and fuse it into my build.”
- Powertrain Modifications
- Spoon Sports air filter
- Spoon Sports exhaust
- CSF front intercooler / charge pipe
- Chassis/Suspension Modifications
- BBS REV7 forged wheels 18×9.5 +22
- Yokohama A005 racing slicks (250/650/18)
- RSR Sport-I coilovers
- Whiteline adjustable rear upper arm
- Whiteline rear lower control arm
- Stoptech ST-40 Trophy front Big Brake Kit
- Exterior Modifications
- EVS Tuning GTLM mirrors
- EVS Tuning front airdam
- EVS Tuning carbon front splitter
- EVS Tuning carbon sidestep
- Voltex fender flares
- Voltex Type 12 wing
- Shaved front fog light
- Interior Modifications
- Eimer Engineering custom 6 -point roll cage
- Sparco QRT-R kevlar racing seats
- Sparco Prime H7 6-point harness
- Sparco R325 steering wheel
- Sparco Racing quick release
- AEM CD-7 race dash
- Acuity adjustable short shifter
- EVS Tuning custom seat mounts
- EVS Tuning titanium rear drop shift knob
- EVS Tuning dry carbon door cards
- EVS Tuning carbon center console
Sara Choi’s Integra, Built by Tony Star Performance
Born and raised in Honolulu, Hawaii, Sara Choi began her automotive career at Sonic Motorsports, a well-known tuning shop in Hawaii at age 15. Now living in Los Angeles, the car enthusiast, drifter, model, host and actor is connecting the automotive community with her passion for art, music, fashion and gaming. Choi’s artistic approach to tuning is clearly exhibited by her creation of a custom wide body for her project Integra.
“My favorite part of being a car builder is that you get to express yourself however you want, especially when you’re building a car as exciting as the next-gen Acura Integra,” said Sara Choi. “It’s a thrill building my own version of such an iconic car.”
- Powertrain Modifications
- GReddy Performance intercooler
- GReddy Performance oil cooler
- Sports Touring Cat-Back Exhaust
- Chassis/Suspension Modifications
- Advan RSDF wheels 19×10 +25 and 19×10.5 +15
- Nexen Sport R tires (245/40/19 and 275/35/19)
- Tein Suspension Flex Z coilovers
- Exterior Modifications
- Custom wide body kit designed by Walter Kim & Sara Choi
- Inozetek Super Gloss Pearl White Film installed by Everlasting Wraps
- Mugen window visors
- Interior Modifications
- Evasive Motorsports x Bride Zeta IV seats
- Battle Craft Hyper Teardrop Shift Knob
- Battle Craft Hyper RQR (Race Quick Release)
- Dogfight Race Pro 350mm Wheel
Coco Zarita’s Integra, Built by Autotuned
From Santiago, Chile, pro BMX athlete, car builder and amateur drifter Coco Zarita has competed in over a dozen X-Games with multiple podiums. Now living in Southern California, Coco’s love of action sports competition has inspired the design of his project Integra, which includes a coilover suspension, carbon bodywork and a custom wrap designed by artist Andreas Wennevold.
“It’s a dream come true to be one of the first builders on the planet to get their hands on the new Acura Integra,” said Coco Zarita. “We grabbed some inspo from the NSX GT designs and added some race car features to help bring in my own personal style and achieve this new look for the next-gen Integra.”
- Powertrain Modifications
- A’PEXi exhaust
- HPS cold air intake
- GReddy intercooler
- HPS coolant hose
- HPS charge pipe
- HiRev Sports red engine cover
- Chassis/Suspension Modifications
- Kansei KNP wheels 18×9.5 and 18×10.5
- Michelin Pilot Sport 4s tires (245/35/18 and 265/35/18)
- RSR Sport-I coilovers
- HPS front upper performance strut bar
- Wilwood 6-piston front big brake kit
- Exterior Modifications
- “Gotham Gray” 3M vehicle wrap
- APR GT carbon mirrors
- Acura OEM front diffuser
- Auto Tuned 3-inch custom carbon front lip
- Auto Tuned custom carbon side skirts
- Auto Tuned 30mm carbon over fenders
- APR GTC carbon wing
- Andreas Wennevold custom graphics and design
- Interior Modifications
- MOMO Start racing seat
- PCI seat brackets
- MOMO 6-point camlock harness
- NRG harness bar
- MOMO MOD Drift racing steering wheel
- NRG quick release
- NRG short steering hub
- Powertrain Modifications
-
Hyundai Motor UK announces IONIQ 6 First Edition pricing and specification
Hyundai Motor UK has announced pricing and specification of the IONIQ 6 First Edition, the first model in the eagerly anticipated IONIQ 6 range and the second model of the IONIQ all-electric-vehicle line-up brand.
Built on Hyundai Motor Group’s Electric-Global Modular Platform (E-GMP), IONIQ 6 is equipped with an array of advanced technologies and a customer-centric, spacious interior. In addition, it provides the First Edition with an extended range of up to 320 miles on a single charge (WLTP-combined).
That range is aided by an ultra-low drag coefficient of just 0.21, assisted by its low-sitting front surface, active air flaps at the front and wheel gap reducers. IONIQ 6’s cocoon-shaped interior serves as both a comfortable hideaway and personal space, replete with optimised legroom, practical features and sustainable materials to facilitate a mindful, eco-friendly mobility experience and lifestyle.
Priced at £54,995, the limited volume IONIQ 6 First Edition takes the stylish appearance of Hyundai’s Electrified Streamliner to the next level with a range of exclusive exterior and interior design elements. On the outside, the model’s 20-inch wheels feature an eye-catching matte black finish. Meanwhile, glossy black mouldings on the front, rear and side as well as glossy black Mirror Caps emphasise IONIQ 6 First Edition’s sleek look.
Inside, customers can enjoy a selection of design flourishes unique to IONIQ 6 First Edition, including a black interior with a black headliner. In addition, exclusive leather combination seats feature Grey Tartan fabric inspired by Hyundai’s Prophecy EV concept. The model is also equipped with dedicated First Edition ECONYL® floor mats with Grey Tartan highlights.
Customers can also select from four exterior body colours: Biophilic Blue Pearl, Serenity White Pearl, Nocturne Grey Metallic and Gravity Gold Matte. The IONIQ 6 is also the first Hyundai model to introduce the new design of the ‘H’ emblem, finished in black aluminium on the First Edition.
The IONIQ 6 will also be available in two other trim levels; Premium and Ultimate. Pricing and specification will be announced soon.
IONIQ 6 is the second Hyundai model to be built on the groups E-GMP platform, with the First Edition using a 77.4 kWh battery with all-wheel drive powertrain to provide 325PS of power and 605 Nm of torque. The E-GMP platform’s 800v charging system with 350kW ultra-fast charger compatibility also includes a battery heating system, assuring optimised charge times in all conditions. On top of this, customers will be able to enjoy a free one-year subscription to IONITY Premium package, through Hyundai’s pan-European integrated public charging service Charge myHyundai. Charge myHyundai offers access to over 400,000 charging points across Europe, including AC and DC connectors.
IONIQ 6 continues Hyundai’s vision for sustainability with its interior is trimmed in sustainable materials and colours. Eco-process leather and recycled PET fabric is used in the seats, bio-TPO skin for dashboard finishes, bio-PET fabric used in the headliner and floor mats made from ECONYL®, a regenerated nylon yarn that can be used to make sustainable products.
Ashley Andrew, Managing Director, Hyundai Motor UK said “IONIQ 6 has already received an overwhelmingly positive response from customers and media alike with its combination of streamliner styling and long-distance EV performance. The IONIQ 6 First Edition presents customers with not only a unique specification but also an opportunity to secure one of the very first vehicles to reach the UK.”
Key Specification – (Full IONIQ 6 specification TBC)
POWERTRAIN PREMIUM RELAXATION SEAT (PASSENGER) 77 kWh BATTERY PACK PREMIUM RELAXATION SEAT (DRIVER) EXTERIOR SAFETY 20″ WHEELS WITH MATTE BLACK FINISH SVM (SURROUND VIEW MONITOR) STYLE BVM (BLIND-SPOT VIEW MONITOR) OPENABLE SUNROOF PCA (PARKING COLLISION-AVOIDANCE ASSIST) ; REVERSE/FORWARD LED LIGHTS FOR SUNROOF HIGHWAY DRIVING ASSIST 2 BLACK PACKAGE (BLACK HYUNDAI LOGO FRONT & REAR) INTERIOR BUMPER MOULDINGS HIGH GLOSSY BLACK VEHICLE TO LOAD (V2L) – INSIDE SIDE MOULDINGS HIGH GLOSSY BLACK WIRELESS CHARGER (PHONE) OUTSIDE MIRRORS – GLOSSY BLACK HEAT PUMP INTERIOR ECM (ELECTRONIC CHROMIC MIRROR) METAL PEDALS HEAD-UP DISPLAY (TFT-LCD TYPE) LEATHER ENCASED SEATS WITH TARTAN DESIGNED CLOTH BASE AND LUMBAR SUPPORT ASD (ACTIVE SOUND DESIGN) COMFORT & CONVENIENCE EXTERIOR HEATED FRONT AND REAR SEATS SOLAR WINDSHIELD HEATED STEERING WHEEL FLUSH HANDLE (AUTO) TAILGATE – POWER OPENING (HEIGHT ADJUSTABLE) VEHICLE TO LOAD (V2L) OUTSIDE MEMORY SEAT (DRIVER)+ POWER SEAT (PASSENGER) RSPA 2 (REMOTE SMART PARKING ASSIST) LUMBAR SUPPORT (PASSENGER) PREMIUM AUDIO (BOSE) Key Technical – (Full IONIQ 6 specification TBC)
Overall Length (mm) 4,855 Width including mirrors (mm) 1,880 Height (mm) 1,495 Wheelbase (mm) 2,950 Front / Rear Overhang (mm) 850 / 1,055 1st Row Head Room (mm) 974 2nd Row Head Room (mm) 937 1st Row Leg Room (mm) 1,154 Frunk + Trunk Capacity litres (VDA) 14.5 + 401 -
Ferrari 330 GTC
Leading Ferrari specialist Bell Sport & Classic is proud to reveal full details of the benchmark-setting restoration of a 1966 Ferrari 330 GTC, which secured a convincing victory at the 2022 Salon Privé Concours d’Elégance in September against world-class opposition.
The concours award and the car’s Ferrari Classiche Certificate stand testament to the intensive three-year-long restoration and rebuild at Bell Sport & Classic’s Hertfordshire headquarters. Led by the company’s expert team, who together have many decades of experience in Ferrari restoration, every component on the 330 GTC has either been restored, overhauled or reverse engineered, with the very latest restoration and engineering techniques employed.
Like all Bell Sport & Classic’s restorations, a beyond obsessive approach was applied through an unmatched blend of experience and expertise, creating a car that is in every facet better than when it left the factory – and what is quite probably the finest Ferrari 330 GTC in existence.
The gentleman’s Ferrari
“Unveiled at the 1966 Geneva Motor Show the 330 GTC took its chassis from the 275 GTB Berlinetta and its 300hp four-litre V12 engine from the 330 2+2 Coupé. Cloaked in an achingly elegant Pininfarina body, it made an immediate impact and was very much a car for the more discerning driver. It’s the kind of Ferrari that you could imagine Enzo using as a daily driver,” explains Tim Kearns, Bell Sport & Classic’s Managing Director.
“Maranello built 600 examples between 1966 and late 1968 and this example was built during the initial year of production,” adds Bell Sport & Classic’s Head of Acquisition & Sales, Peter Smith. “It first came to us six years ago having clearly had a good amount of use, the car initially sold into Switzerland had spent time in the US and was eventually found in Venezuela. Although the engine wasn’t running and it had been repainted blue, literally every nut and bolt was original, so it was a good example to start with – but we knew we could make it as close to perfect as possible.”
Two weeks were spent methodically removing all the Ferrari’s interior components before the restoration team, led by Elliot East, turned to the exterior trim and began carefully stripping parts, including the brightwork, bumpers, headlights, and glass. Only after that stage was completed was attention turned to the drivetrain and suspension components.
Restored to factory-fresh specification
Bell Sport & Classic’s exacting approach means that the same effort is lavished on every element of the car – whether visible or not. The 330’s heavily kerbed and severely corroded original 14-inch cast magnesium wheels were restored and elevated to gleaming concours-winning condition; this same approach is applied throughout the car – even to components that will remain hidden from view, deep in the fabric of the machine.
As Matt Wilton, who oversaw the project and has a lifetime of experience at the highest level of Classic Ferrari Restoration, explains: “Several of the imperfections were relatively minor, and would most likely never be seen by a customer, but for a Bell Sport & Classic restoration, everything matters. Yes, it’s highly time-consuming, but it gives our customers complete confidence that a car they receive from us is perfect in every detail.”
A month was dedicated to stripping the suspension down, and the components sandblasted, before undergoing repainting and replating as required. The original shock absorbers, suspension arms and springs were all refurbished and retained.
“The steering arm and every little bracket that had been nickel-plated originally, were replated,” continues Matt Wilton. “Other components, such as the anti-roll bar drop link, were restored to their original satin nickel finish. Absolutely everything on this car is in the same condition, or better, as the day it left the factory.”
Walnut shells for that delicate touch
The process that would eventually ensure an exquisite exterior finish utterly devoid of even the slightest blemish began more than two years before painting was scheduled, and involved blasting the car’s body, not by sand, but by crushed walnut shells.
“One of the disadvantages of using sandblasting on the delicate areas of the larger panels is that it can put heat into the steel and cause it to distort. However, that doesn’t happen with walnut-blasting,” continues Elliot East. “It’s a technique that’s always best for the potentially more fragile areas.”
When the car arrived at Bell Sport & Classic it was a pale blue and had clearly been painted several times over its life. As part of the team’s restoration research process, the original factory build sheets were sourced confirmed that 330 GTC Chassis No. 9069 left Maranello a beautiful and unusual pale green. Before the body was painted and the Ferrari returned to its stunning original light green metallic Verde Chiaro Metallizato, the team undertook a complete dry build. While this process of reassembling and then stripping back down again before painting takes time, it’s integral to every restoration project undertaken by Bell Sport & Classic.
And again, despite the team’s accumulated decades of experience restoring historic Ferrari models, it ensures that nothing is taken for granted or left to chance. At this point, the bodywork is fully re-assembled, with components such as the glass, chrome wear, doors and all exterior fixtures fully incorporated. Every stage of the process is precisely measured, and triple checked. This painstaking attention to detail is critical to mitigating the effect of the additional thickness of the primer and paint.
“If you have too much paint on the window frames, it could prevent the glass from fitting, or if there is too much in the guttering on the roof, it could prevent the door seal from fitting properly. We’re only talking points of a millimetre, but often that’s all it takes to make the difference,” explains Elliot East.
No detail too small
As typified by the GTC’s chassis, Bell Sport and Classic poured as much time and effort into perfecting the paint finish on the details that can’t be seen. Even the quality of the paint finish inside the small circular demister vent in the C-pillar matches the outstanding finish of the paint on the body, a rare achievement on this model, a real ‘tell’ for those in the know.
“As soon as we unveiled the car at Salon Privé, that was one of the areas that the judges and aficionados who really know this model went to straight away,” smiles Matt Wilton.
“And it was the same with the satin black paint inside the wheel arches and engine bay. It took three attempts before we were certain we got exactly the correct and original degree of shine and tonality.”
Even after the concours judges had peered into the C-pillar air vents, crawled underneath, and lifted the boot carpet, Bell Sport & Classic’s impeccable craftsmanship still stood up to the strictest scrutiny.
Again, the pursuit of perfection continued to areas that aren’t even visible. “Despite having been painted black at some stage – as most have been – when the car was new, its twin fibreglass-coated fuel-tanks were painted a pale turquoise blue,” explains Elliot East. “It’s not an easy colour to match, and some might argue that it’s not that important as the carpet hides the tanks. But it’s important to us. And that’s why the fuel tanks are once again finished in period-perfect turquoise after we found and original area of paint inside one of the necks and colour matched it.”
V12 beating heart
Each phase of the strip-down, refurbishment, reassembly, and testing, of the 330 GTC’s Colombo V12 engine was completed at Bell Sport & Classic’s in-house engine workshop, under the lead of Attilio Romano, a former member of the Ferrari factory technical team in Maranello, who ran H.R. Owen’s Ferrari technical department for 22 years.
It’s an obsessive approach, but it ensures perfection, with every single component, down to the smallest stud, stripped, vapour-blasted, refurbished and replated as required, regardless of time and expense. Once the V12 was reassembled, two days were spent on dyno-testing, assiduously checking for the most minor issues, such as potential minute oil leaks.
Then, after the car was rebuilt and the engine placed back in situ, it was subjected to 500 miles of road testing. “We restore cars, not just to be sat on a concours lawn, but driven and enjoyed by their owners,” adds Peter Smith, himself an experienced racer and part of the project’s dynamic sign-off process. The fully rebuilt engine produces 300hp at 7000 rpm – precisely the same as in period.
The gearbox was exposed to the same in-depth strip-down and rebuild process as the engine. And while every effort was made to maintain optimum originality, certain new parts were required to ensure a sublimely smooth driving experience. These included the selector forks, synchroniser hubs and synchroniser rings.
In many ways, the four-pot calliper braking system proved the most challenging aspect of the drivetrain, as Elliot East explains. “We weren’t happy with the existing brake servo, which was challenging because finding an original replacement part in good condition was just about impossible. But it’s like trying to ease off a seized nut – we never give up. And as we have contacts with parts suppliers and Ferrari enthusiasts all over the globe, we finally sourced an original.”
Creating a sublime interior
Back in 1966, the 330 GTC left Maranello sporting a gorgeous black leather interior, but more than half a century of use had taken a very heavy toll upon it. Restoring the cabin of a historic Ferrari to its former glory represents a significant challenge that not many can truly perfect.
Bell Sport & Classic entrusted the restoration of the car’s cabin to O’Rourke Coachtrimmers and Suppliers. Based in Rudgwick in West Sussex, the company has decades of experience in restoring Ferrari cabins to concours-winning, period-perfect condition. O’Rourke Coachtrimmers and Suppliers has built its world-leading reputation not just on the quality of its craftsmanship, but also by applying the same forensic approach and research-driven authenticity that Bell Sport & Classic exercises itself.
So, when the customer wished to change the colour of the leather, it was a straightforward task for O’Rourke Coachtrimmers and Suppliers to outline the range of options offered by the factory more than half a century ago. As a result, the car’s new owner was able to select the precise Ferrari Conolly VM 218 fawn leather colour, which was matched with period-correct detailing, including the colour and weave of the carpets and the headlining, right down to the vinyl on the binding of the carpets, with all material sourced from Italy.
Fortunately, the car’s original seat frames were in good condition and retained, although new foam inserts were fitted to ensure optimum comfort and support. New webbing was used for the belts, but all the fittings and buckles are original and have been restored, including the iconic Irvin badges.
The Ferrari’s wooden veneer dashboard was in relatively good condition, apart from the fact that it had a mysterious hole in it. “All the original dials and controls were present and correct and accounted for, so the hole had presumably accommodated an additional aftermarket feature that had been fitted at some point and then removed again,” deduced Elliot East. Once again, vast reserves of skill, experience and patience were required to perfect this element of the restoration, with dozens of different wood stains tried and revised before the correct match was found.
At some point in the car’s history, a 1980s radio cassette had been fitted to the centre console. Bell Sport & Classic removed the unit and fitted an original Beck Europa radio, of the precise type the car would have left the factory with. Restored and uprated by vintage car radio specialists, Chrome London, the period radio is equipped with modern internals and Bluetooth compatibility.
Beauty that is much more than skin-deep
“With this Ferrari 330 GTC, we have created a car that looks perfect from first glance right down to the details you will never see,” adds Peter Smith. “We believe passionately that beauty is so much more than skin-deep. That’s why, if you took this car apart, every component would look new, even though it is fifty-six years old. Versus the more famous V12 Ferrari of the period, the 330 GTC hides its light under a relative bushel, but it is such a wonderful combination of style and performance that this is one Ferrari unlikely to remain underrated for much longer.”
Bell Sport & Classic Managing Director, Tim Kearns concludes: “It’s a fundamental part of our philosophy that we just don’t build a car to get maximum points from the judges in a concours, it’s got to drive beautifully, too. The 330 GTC was the only car in its class to take part in the Salon Privé tour in the lead up to the event. It was driven enthusiastically and enjoyed on the wonderful roads of the Cotswolds over two days, before arriving at Blenheim Palace, parking up on the Concours judging lawn, and then taking the top Ferrari prize.
“Every car we restore, while flawless visually, has got to perform at the highest possible level – it’s got to be a true driver’s car. And it has got to be capable of being used every day of the week even if it isn’t. We are confident that Bell Sport & Classic sets the standard for the restoration of historic Ferrari models. The plaudits this 330 GTC has achieved validate the beyond obsessional approach of our exceptionally talented, knowledgeable, and passionate team. It builds on the success of our other recent Ferrari restoration projects – which have been met with universal acclaim for their pursuit of perfection – and further underlines our objective to continually raise the bar. This is exactly what Bell Sport & Classic does. Watch this space for our next project.”
-
Suzuki S-Cross Full Hybrid [UK]
The Suzuki S-Cross has earned high acclaim for its stylish design, compact and easy to manage dimensions and good on-road performance. It is was replaced in late 2021 by an all-new model which takes advantage of Suzuki’s long-established expertise in packaging vehicles with an even higher level of safety equipment and latest technology all as standard. The Full Hybrid version with AGS (Auto Gear Shift) is now on sale and Mild Hybrid models continue to be available with manual transmission only.
Standard equipment for Motion is very comprehensive and includes 17-inch painted alloy wheels, three signature LED projector headlamps for low and high beam, Apple CarPlay and Android Auto smartphone connectivity, Traffic Sign Recognition, Blind Spot Monitor, Adaptive Cruise Control with speed limiter, keyless entry and start, dual zone auto air conditioning, 7 inch display screen, heated front seats, front and rear parking sensors, rear parking camera and seven airbags.
Moving up to Ultra adds ALLGRIP Select four-wheel drive, 17-inch polished alloy wheels, leather seat upholstery, integrated on-board navigation with 9-inch screen, panoramic sliding sunroof and further driver safety and convenience with the fitment of a 360 view camera.
S-Cross is available in a total of six different shades of which one is a solid colour and all others are metallic finish.
The 1.5-litre (K15C) engine is fitted to both model grades and was intially introduced on the Vitara Full Hybrid model earlier in 2022. The higher-powered Suzuki Hybrid system consists of a 140V lithium-ion battery and inverter, Motor Generator Unit (known as MGU), a 12V lithium-ion battery as well as a conventional 12V lead-acid battery to power components requiring lower voltage such as lights, instruments and heating / air conditioning.
The full Hybrid system has two switchable modes which are Eco and Standard. One switch enables the driver to change between the two modes depending on conditions and also increases the frequency of EV driving. In Standard mode operation, the MGU more frequently assists the petrol engine to allow more spirited driving enjoyment.
TRANSMISSION
The S-Cross Full Hybrid is equipped as standard with Auto Gear Shift (AGS) that automatically shifts the manual transmission with gear ratios optimised to help provide a good combination of performance and fuel economy. This enables the driver to enjoy both the direct driving experience of a manual gearbox and the shifting ease of an Automatic Transmission. Another key advantage is lower component weight versus a conventional torque converter type Automatic. The transmission also has a manual mode with steering wheel mounted shift paddles.
Suzuki’s ALLGRIP ‘Select’ system is fitted as standard for the Ultra grade and incorporates four driver-selectable modes for safe, enjoyable driving on diverse surfaces. It debuted in the S-Cross model at first launch and has proved very successful. rear wheels before any slippage The system has four driver-selectable modes which are Auto, Sport, Snow and Lock.
SUZUKI CONNECT AND AUDIO EQUIPMENT
Suzuki Motor Corporation has now introduced Suzuki Connect in the UK. Suzuki Connect utilises the vehicle’s data communication module (DCM) to connect users to their vehicles in real time, enabling owners to take advantage of convenient functions via the Suzuki Connect smartphone app. Suzuki Connect is initially available in the current range of S-Cross models, before being introduced in other models across Suzuki’s range in the future.
By connecting the vehicle via the Suzuki Connect app, available on Android and iOS, users can access a wide range of convenient connected services, including the ability to monitor and receive notifications about the status of their vehicle in real time, remotely lock the vehicle, and view information such as driving history and the location of their parked car.
Users can also choose to receive maintenance-related information and warning light notifications via the Suzuki Connect app, and if an issue is detected, vital diagnostic information can be seamlessly shared with their registered Suzuki dealer, allowing for faster and more comprehensive after-sales support.
Using their smartphone, drivers can monitor and receive notifications about their vehicle’s status, as well as lock the vehicle remotely.
The audio system fitted to the Motion grade has a Smartphone Linkage Display Audio (SLDA) with a seven inch touch panel display that enables intuitive operation. The system also allows the driver to use certain smartphone applications with MirrorLink, Android Auto and Apple CarPlay connection.
For the Ultra grade, the screen size increases to nine inches and includes a three dimensional navigation map that makes landmarks easy to distinguish and includes a multitude of features. The system in Ultra models also enables Apple CarPlay connectivity wirelessly.
Apple CarPlay is the smarter and safer way to use iPhone in the S-Cross. Apart from making calls it also facilitates receiving directions for optimised traffic conditions, listening to music, accessing email, text messages and more.
-
Ken Block and the Audi S1 Hoonitron electrify Las Vegas
Ken Block and Audi Tradition’s collection of vehicles, including the Audi S1 Hoonitron, recently made an impact during a night-time film shoot in Las Vegas. The Audi S1 e-tron quattro Hoonitron was driven by Ken Block, performing stunts like drifting along the famous Eiffel Tower and donuts on the legendary strip in front of Le Mans legend Tom Kristensen. The film shoot took place over several days and was filmed in various locations around Las Vegas. Ken Block has now released the finished product.
“With the S1 Hoonitron we broke entirely new ground at Audi,” says Oliver Hoffmann, Member of the Board for Technical Development at AUDI AG. “Developing a fully electric prototype for the unique requirements of our partner Ken Block was a big and exciting challenge to which the whole team rose with flying colors. It is great to see how ‘Vorsprung durch Technik’ is presented in an all-new environment.”
Audi Sport created the Audi S1 Hoonitron, a unique car designed specifically for Ken Block. The vehicle features two electric motors, all-wheel drive, impressive power, a carbon fiber chassis, and meets FIA safety standards. The body shell, which was designed by Audi Design under Marc Lichte’s leadership, brings to mind the iconic Audi Sport quattro S1 that dominated the Pikes Peak hill-climb race. Ken Block and his team worked closely with Audi during the car’s development.
The Electrikhana film features not only the S1 Hoonitron but also other Audi Tradition models such as the Audi 90 IMSA GTO (1989), Audi 200 Trans Am (1988), Audi Sport quattro S1 Pikes Peak (1987), Audi quattro Gruppe B A2 (1984), Audi R8 LMP, and Audi R18 e-tron quattro from Le Mans. Tom Kristensen, who holds the record for most wins at Le Mans with nine victories, also appears briefly in the film at a red traffic light.
https://www.youtube.com/watch?v=SO2Li9BMQp8
-
BMW M2 M Performance Parts
The new BMW M2 promises unadulterated driving pleasure through every mile – of everyday journeys and track sessions alike. The race-inspired character of the compact high-performance sports car can be accentuated to stunning effect with the help of the BMW M Performance Parts specially developed for this model. Available from the launch of the new M2 (which gets underway in April 2023), the retrofit products from the Original BMW Accessories range add extra touches of rich emotionality to the design of the new BMW M2.
The BMW M Performance Parts for the car’s aerodynamics, powertrain, chassis and cockpit offer a wide variety of options for customising the new BMW M2 with maximum performance in mind. All the components were developed on the back of BMW M GmbH’s motor-racing expertise and the experienced it has garnered over five decades, and have been precisely tuned to match the two-door model’s specific characteristics. They reinforce the pure-bred performance credentials of the new BMW M2, whose compact dimensions, 338 kW/460 hp six-cylinder in-line engine, optionally available six-speed manual gearbox, sophisticated chassis technology and rear-wheel drive make the first step into the world of high-performance cars from BMW M GmbH a hugely enticing one.
Exclusive materials, enhanced aerodynamic properties: the BMW M Performance exterior components.
All the retrofit products in the BMW M Performance Parts portfolio stand out with their high-impact design, exclusive materials and top quality. The BMW M Performance exterior components for the new BMW M2 therefore match the two-door model’s styling and geometry to perfection. And they have already undergone homologation alongside the overall vehicle, meaning they comply with statutory safety regulations as well as the BMW Group’s own strict standards.
The carbon-fibre add-on parts for the front, sides and rear are made from carbon-fibre-reinforced plastic. They optimise the car’s aerodynamic properties while also accentuating its racing aura with a clear coat finish that exposes the composition of fibres beneath. The M Performance front splitter carbon fibre and M Performance air intake trim carbon fibre, for instance, ensure the new BMW M2 makes a particularly striking impression. Customers wishing to give the car’s side profile a sharper visual edge have a choice of M Performance side skirt attachments carbon fibre, M Performance side spats carbon fibre front and rear and M exterior mirror caps carbon fibre. Airflow around the vehicle can be optimised with the M Performance rear lip spoiler carbon fibre and M Performance rear diffuser carbon fibre. Meanwhile, the M Performance rear spoiler carbon fibre and M Performance roof-edge spoiler in high-gloss Black dial the racing flair up to the max. Further personal touches can be added to the vehicle exterior in the form of an M Performance tow strap and an M Performance antenna cover in aramid, another exclusive fibre composite material.
Less weight, more sound: titanium M Performance silencer system.
The titanium M Performance silencer system available for the new BMW M2 boasts reduced weight, an unmistakable look and distinct racing-car acoustics. Its front pipes are made from lightweight stainless steel while the rear silencer has an all-titanium construction. As a result, the titanium M Performance silencer system is some eight kilograms lighter than the standard item. The exhaust system with its electrically controlled flaps and centrally positioned quartet of tailpipes is offered in combination with a specially modified M Performance rear diffuser carbon fibre. The tailpipe trim module is also made from titanium and has a ceramic coating. Optimised routing of the exhaust gases creates an even sportier driving experience. The soundtrack can be adjusted using the powertrain settings in the M Setup menu and hits a particularly exhilarating note reminiscent of a racing car in Sport and Sport+ modes.
M Performance tailpipe trims in titanium/carbon fibre are available as an eye-catching addition to the standard exhaust system fitted on the new BMW M2. Their sophisticated mix of materials and perforated inner pipes lend the rear end a highly exclusive air.
M Performance suspension with height-adjustable spring cups.
The M Performance suspension available as a retrofit item for the new BMW M2 endows it with even sharper agility and cornering dynamics. Its coilover design with height-adjustable spring cups at the front and rear axle allows the ride height to be lowered by up to 10 millimetres as required. Specially tuned for the new BMW M2, not just on the track but on regular roads as well, the M Performance suspension results in a far more direct connection between the body and road surface. This allows drivers to experience track-inspired driving dynamics on everyday journeys.
The M Performance forged wheels offered for the new BMW M2 also provide the ideal ingredients for an extremely sporty driving style. Each sculpted from a single piece of aluminium, they represent a compelling proposition with their exceptional stability, perfectly true running and visually striking design. The items for the new BMW M2 have a cross-spoke design measuring 20 inches in diameter at the front axle and 21 inches at the rear, which can be ordered in a choice of M Frozen Gold Bronze or M Jet Black matt. The M Performance tyre bags bring motor sport feeling to the customer’s garage, too. They are printed with a logo in the BMW M GmbH colours and a graphic indicating the wheel position, and also have a reinforced handle for easy transportation.
Precision doses of extra racing flair for the interior.
The BMW M Performance Parts range also features high-grade components for the interior of the BMW M2 that bring targeted enhancements to its sports-car cockpit. The M Performance interior trim panels in carbon fibre/Alcantara offered in combination with Alcantara knee pads intensify the racing-car aura inside the cabin. The elaborately hand-crafted interior trim panels are made from open-pore, matt-coated carbon fibre and come with M Performance badging in brushed aluminium. Also available as an individual option, the Alcantara M Performance knee pads offer additional support under particularly hard cornering and set the seal on the sporting ambience. A matching M Performance armrest in Alcantara is also available for the centre console of the new BMW M2.
On models equipped with M Sport seats, the sense of sportiness and exclusivity can be turned up another notch with the M Performance backrest covers in carbon fibre/Alcantara. The hand-crafted head restraint trims are available in a choice of open-pore or high-gloss carbon fibre and carry an M Performance badge. The remainder of the rear panel for the driver’s and front passenger seats is trimmed in Alcantara.
The M Performance steering wheel Pro is ideal for cornering with supreme precision. It features a distinctly contoured grip area in Alcantara with large thumb rests and a special lining, while the rim’s upper section and slightly flattened lower section are wrapped in top-quality fulled leather. A centre marker and decorative stitching in the BMW M GmbH colours put the finishing touches to the steering wheel’s stunning looks. The M Performance steering wheel trims offer another route to increased driving pleasure with their high-quality materials and racing-car feel. They are available for the new BMW M2 in a choice of carbon fibre/Alcantara and carbon fibre/leather. Both variants can also be combined with the M Performance shift paddles carbon fibre. The M Performance door sill plates carbon fibre provide the ideal transition between the dynamism of the new BMW M2 exterior and the sports car flair of its cabin. Their carbon fibre inlays are printed with a coloured M Performance logo.
The portfolio of products for optimising the new BMW M2’s racing characteristics in distinctive style is rounded off by velour M Performance floor mats featuring decorative stitching in contrasting colours and M Performance badging, as well as M Performance door pins with a coloured M logo and the M Performance fuel filler cap carbon fibre.
CO2 EMISSIONS & CONSUMPTION.
BMW M2 Eight-speed M Steptronic transmission:
- fuel consumption combined in the WLTP cycle: 9.8 – 9.6 l/100 km;
- CO2 emissions combined in the WLTP cycle: 222 – 218 g/km;
- figures for the NEDC cycle: – .
BMW M2 Six-speed manual gearbox:
- fuel consumption combined in the WLTP cycle: 10.2 – 10.0 l/100 km;
- CO2 emissions combined in the WLTP cycle: 230 – 226 g/km;
- figures for the NEDC cycle: – .
-
Toyota Tundra TRD Lift Kit
The all-new Toyota Tundra is raising the bar once more with a newly available 3.0-inch lift kit developed by Toyota Racing Development (TRD) that makes the already capable full-size pickup bigger and bolder. This new lift kit is available nationwide as a dealer-installed option, and it’s the only Toyota-approved lift kit designed to work with the Toyota Safety Sense (TSS) system.
“There are many compromises with aftermarket lift kits, some of which can impact the function of vehicle features or safety systems,” Mikhal el Arculli, TRD principal engineer says. “We have designed this kit to work seamlessly with the Tundra’s standard features, retain all Toyota Safety Sense (TSS) functionality, maintain similar stock driving dynamics by creating a kit with a high center of gravity and provide a look and feel customers want with a lift.”
Bilstein monotube shocks and TRD red coil springs are tuned by TRD, much like the tried-and-true dealer-installed lift kit available on the Tacoma mid-size pickup that debuted last year. The shocks feature digressive pistons to provide low-speed body control as well as exceptional high-speed stability. Forged upper control arms from Detroit-based Roush Performance are equipped up front. These stronger UCAs complement the additional suspension travel given with the lifted suspension.
TRD Designed and Developed Kit Includes…
- Bilstein front & rear shocks
- Taller front coil springs
- Roush forged upper control arms
- Front lower knuckles
- Front stabilizer links
- Front outer tie rods
- Front tie rod sleeves
- Front extended drive shafts
- Front bump stops
- Extended brake flex hoses
- Rear spring spacers
The kit not only raises the truck, giving it a heroic appearance and increasing ground clearance by 2.6 inches, it also increases off-road capability with increased approach and departure angles. The approach angle increases from 21.0 to 26.0 degrees and departure angle from 24.0 to 25.0 degrees.
The Tundra TRD lift kit includes all the necessary hardware and is only available for dealer installation. The manufacturer’s suggested retail pricing for the kit is $3,995, not including installation labor. It is available for model year 2022 and newer Tundra iFORCE and iFORCE-Max 4×4 models with either the 5.5- or 6.5-foot bed. The kit is not compatible with the TRD Pro, TRD Sport or trucks equipped with the optional Adaptive Variable Suspension (AVS) or air suspension.
The Tundra TRD Lift Kit comes backed by the same warranty as all TRD accessories, which includes a 3-year, 36,000-mile warranty on parts if it is installed prior to or at the time of the sale. If purchased after the new vehicle purchase, the coverage is 12 months, regardless of mileage from the date the accessory was installed on the vehicle or the remainder of any applicable new vehicle warranty (whichever provides greater coverage).
-
Vauxhall Grandland GSe
Vauxhall has revealed the New Grandland GSe – a performance electrified version of the established family crossover, to sit alongside the recently announced All-New Astra GSe and All-New Astra Sports Tourer GSe as part of Vauxhall’s new GSe electrified performance sub-brand.
The New Grandland GSe combines a 1.6-litre turbocharged petrol engine with two electric motors – one on each axle – for a combined power output of up to 300PS (provisional WLTP combined fuel consumption 217.3mpg, CO2 emissions of 31-29 g/km). The plug-in hybrid powertrain makes the Grandland GSe a permanent electric all-wheel-drive vehicle with optimum traction and class-leading acceleration from a standstill. 0-62mph takes just 6.1 seconds, while top speed is 146mph (84mph in electric mode).
Featuring a plug-in hybrid powertrain, the New Grandland GSe offers enhanced performance combined with ultra-low emissions. All-wheel drive traction, unique suspension and revised steering combine to deliver performance-oriented handling, while maintaining the versatility and style New Grandland is known for. Sitting in the C-SUV class, the New Grandland GSe will be one of the few performance SUVs outside of the premium segment.
James Taylor, Managing Director, Vauxhall, said: “Following the reveal of the All-New Astra GSe and All-New Astra Sports Tourer GSe, the New Grandland GSe Plug-in Hybrid is a fantastic addition to our new electrified performance sub-brand, as we work towards offering a fully electric vehicle line-up by 2028. With sharper styling, improved handling and an electrified powertrain delivering responsible performance, the New Grandland GSe will offer greater driving pleasure while maintaining the versatility the Grandland is known for.”
Like the All-New Astra GSe and All-New Astra Sports Tourer GSe, the New Grandland GSe features a unique suspension set-up and steering calibration. With MacPherson struts at the front and a multi-link axle at the rear, the New Grandland GSe is fitted with firmer springs and dampers with KONI FSD (Frequency Selective Damping) technology, which enables different damping characteristics for the optimum balance between ride comfort and handling. As a result, the New Grandland GSe offers more precise and consistent responses while retaining superior stability under braking, in corners and at higher speed.
The bold and pure exterior design of the Grandland with its ‘Vizor’ front end is further enhanced by signature GSe styling cues: 19-inch alloy wheels inspired by the award-winning Manta GSe concept; a unique rear diffuser; and a GSe emblem on the tailgate. As a further distinguishing feature, the Grandland GSe is optionally available with a black bonnet. Inside, the new Alcantara®-trimmed front sports seats have been certified by AGR*, providing additional comfort and support for sporty driving.
The New Grandland GSe Plug-in Hybrid will go on sale in the UK towards the start of 2023 with customer deliveries scheduled from Spring 2023. Further specification details will be announced in due course.


















