Auto News – Page 606 – Automobiles Review

2014 Dodge Dart GT, Challenger R/T and Charger R/T Equipped With Scat Packages

Dodge and Mopar has just announced the introduction of new Scat Package performance stage kits for the 2014 Dodge Challenger, 2014 Dodge Charger and 2014 Dodge Dart at the 2013 SEMA show in Las Vegas. They honor the 45th anniversary of the legendary “Scat Pack Club” that played a very important role.

The Scat Pack Club is synonym of extreme performance and now both brands are delivering factory-engineered performance stage kits that are known as “Scat Packages”. The kits will be available for the aforementioned vehicles at a cost-effective price.

Each Scat Package kit comprises of a numbered hard badge associated with its performance stage. Those who will purchase the kits will have the chance to proudly display the emblem on their vehicle as a badge of honor. The Scat Package performance upgrade kits will be available in dealerships in the spring of 2014.

Scat Package 1 is created with the aim to deliver horsepower boost through three modifications: Mopar cold-air intake to provide increased air-flow into the engine, Mopar cat-back exhaust to free up downstream airflow, and a performance calibrated engine controller, optimized to the 5.7-liter HEMI engine.

Next, the Scat Package 2 doubles the horsepower and is for those looking for greater performance. Moreover, there are also new Mopar performance camshaft works in combination with the components of the Scat Package 1 kit. This results in enhanced engine breathing and additional acceleration.

The last package, the Scat Package 3 is prepared for those searching for extreme performance and ultimate bragging rights. It offers optimized performance calibration, Mopar performance CNC-ported cylinder heads, Mopar performance camshaft and Mopar hi-flow headers.

2014 Dodge Challenger is additionally enhanced via Mopar’s performance products, 20-inch Classic II forged aluminum wheels finished in Hyperblack II with a polished lip, electronic variable quick-dump side exhaust, front and rear strut bars and an adjustable suspension kit with a coil-over kit and stabilizer bar, black concept hood and side valence, along with a black fuel filler door, black hood pins and sequential tail lamps.

The optimized vehicles also include unique interior. In the case of the Challenger, its coupe was upgraded with Katzkin black performance leather seats and black performance leather door-panel inserts, Challenger’s logo embroidered in bright red on the front leather seats, and red stitching on the seats, shifter boot and steering wheel.

Other details here include red seat-belt webbing and red carpet bindings, satin black and black chrome bezels, and gloss-black trim on the steering wheel, center stack, center console and door handles.

SCAT PACKAGE 1 5.7-liter

“Optimized” engine calibration – tailored to Scat Package 1
Mopar cold air intake
Mopar cat-back exhaust
Scat Package 1 badge

SCAT PACKAGE 2 5.7-liter

“Optimized” engine calibration – tailored to Scat Package 2
Mopar performance camshaft
Scat Package 2 badge

SCAT PACKAGE 3 5.7-liter

“Optimized” engine calibration – tailored to Scat Package 3
Mopar performance ported and polished heads
Mopar hi-flow performance headers
Scat Package 3 badge

Next, the packages are being offered also for 2014 Dodge Charger. Also changed here are the 20 x 9-inch unique lightweight wheels, embellished with black Mopar center caps and a Hyperblack II finish. The body is also adorned by side valence, a unique front splitter and Redline rear spoiler.

The interior of the Charger includes Katzkin black performance leather seats, black leather door panel inserts with red leather Dodge stripes and red accent stitching, red seat-belt webbing, red carpet bindings, and red embroidered Dodge Charger logo in the front seats.

Other highlights that must be mentioned inside the car are the gloss-black steering-wheel spokes and black chrome on the door handles, cluster rings, instrument panel bezels, center console trim, and steering-wheel center ring, Mopar’s bright pedal kit, pistol-grip shifter, door-sill guards, and advanced technology with a wireless charging pad.

Additional touches that supplement the Scat Package kits are the front and rear strut bars, an adjustable suspension kit featuring a coil-over kit and stabilizer bar and an electronic variable quick-dump side exhaust.

2014 Dodge Dart GT will be alos available with the packages. The vehicle is powered by a 184 horsepower 2.4-liter Tigershark engine with six-speed manual transmission. To go further into details, the Scat Package 1 provides great performance and handling improvements from Mopar through a cold-air intake, performance brake pads and a new short-throw shifter.

On the other hand, the Scat Package 2 adds more horsepower via engine calibration which works in conjunction with Mopar cat-back exhaust. The Scat Package 3 provides the ultimate package for those seeking optimal track times and in particular it includes Mopar big brake kit.

The latter comprises of 13-inch vented rotors, four-piston front calipers and stainless steel lines, performance suspension including adjustable springs for ride height, adjustable dampening struts and front and rear sway bars.

Mopar modifications that add beyond the Scat Package kits are the dual vented functional aluminum hood, Mopar side sills, chin splitter and rear diffuser, and a unique new three-piece decklid spoiler to boost downforce. The Dart rides on concept 19 x 8-inch lightweight gloss black wheels, accented with Mopar logo center caps.

The interior of the car includes door bolster inserts with a red border and red accent stitching on the seats, dash, armrest, wheel and shift boot are also found inside, along with red seat-belt webbing on the driver’s side, red trim accents and premium floor mats with red piping.

What also can be found inside are the black chrome on the door pulls, HVAC bezels, and shifter cluster, while an array of Mopar accessories, including the bright-pedal kit, leather-wrapped shift knob, bright door-sill guards, molded cargo tray and wireless charging complete the interior.

SCAT PACKAGE 1 2.4-liter

Mopar cold-air intake
Mopar short-throw shifter
Mopar performance brakes, including slotted rotors and performance brake pads

SCAT PACKAGE 2 2.4-liter

“Optimized” engine calibration (premium octane)
Mopar cat-back exhaust

SCAT PACKAGE 3 2.4-liter

Mopar big brake kit with stainless lines
Performance suspension with adjustable springs and struts
Upgraded performance front and rear sway bars

Source: Dodge

November 7, 2013

Lotus Unveils Elise S Cup R

Lotus Elise S Cup R is the latest addition to brand’s motorsport portfolio which is built specifically for the track only. Here for the first time, a supercharged Elise S’ mid-mounted, transverse, 1.8 litre 2ZR-FE engine has been utilized in a Cup variant.

In addition, the vehicle also includes bespoke livery and aerodynamic body kit. The performance of the vehicle is enhanced over the road-going Elise S via a motorsport-specific engine control module (ECM) and a CFD proved aero pack.

The latter comprises of front splitter, barge boards, winglets, rear diffuser, floor extensions and rear wing. In addition, the weight of the car is extremely low – it is only 924 kg. All this results in additional downforce, which when combined with adjustable damper and springs, reduces lap times by 4 seconds on a 5 km lap over the standard Elise S.

The production of the Lotus S Elise Cup R is scheduled in the beginning of 2014. Its starting price is £39,125.

Lotus Elise S Cup R Specifications:

Enhancements:
- FIA Compliant Rollcage (As previous Cup Versions)
- FIA Compliant Fire Extinguisher
- Motorsport Mapped ECU
- Electronic Battery Isolator
- 6-Point Race Harness (Driver Seat)
- Hans Compliant Race Driver’s Seat
- Track Specification Front Tow Eyes
- Quick Release Steering Wheel
- Body Kit
- Brake Pad Upgrade
- Single way adjustable Dampers
- Hardtop
- Motorsport specification triple-pass radiator
- Polycarbonate Rear Screen
- Forged Alloy Wheels
Options:
- FIA Fuel Cell
- Air Conditioning
- Race Passenger Seat (with 4-point race harness fitted)
- Ultra-lightweight Motorsport Wheels
Powertrain:
- All alloy, 1.8 litre DOHC 4 cylinder, dual VVT-i, 16 valve with Magnuson R900 supercharger utilising Eaton TVS™ technology
Transmission:
- 6-speed manual gear box as standard
Suspension:
- Up Rated TCA Kit
Brakes:
- Twin-piston fixed aluminium alloy front brake callipers.
- Single-piston sliding rear brake callipers.
- 288 mm diameter, 26 mm thick front and rear cast-iron cross-drilled & ventilated brake discs
Wheels:
- Forged Alloy
Tyres:
- Yokohama Advan Neova AD07 LTS tyres F: 175/ 55 R16 & R: 225/ 45 R17
Safety systems:
- Lotus ABS/ EDL

Source: Lotus

November 7, 2013

2014 Nissan Patrol Facelift [video]

Nissan Patrol is a name synonymous with superior performance and luxury and also has a legendary off-roader capabilities. Nissan Middle East has published a new promotional video of the 2014 Patrol Facelift. The 7^th generation comes with minor changes for the exterior and the interior.

The exterior features new front fascia and new taillights as well as refreshed alloy wheels. The interior features tan leather upholstery and a wood-trimmed steering wheel.

The manufacturer has also introduced a limited-run Patrol Black Special Edition which will be produced in 200 units. They will come with several upgrades red upholstery for the seats, chrome detailing and a black matte exterior paint job.

Enjoy!

httpv://www.youtube.com/watch?v=gqa-HTid8es

Source: Nissan

November 7, 2013

Hyundai & Bisimoto Genesis Coupe – 1000HP [video]

Hyundai and Bisimoto Engineering have announced their Genesis Coupe with 1000HP. The monster is specially designed to be a “no-holds-barred racer”.

The 3.8 liter Lambda V6 engine is boosted by twin Turbonetics turbochargers. It also features Arias forged pistons, upgraded fuel injectors and a Magnafuel fuel pump. Other upgrades include custom ignition coils, a Sparco intercooler and a Burns stainless sports exhaust system.

The exterior boasts an Electric Blue paint job, a ventilated hood and a carbon fiber decklid spoiler. We also can see the modified front bumper and the huge intercooler behind it. Other highlights include a drag parachute and 20” aluminum wheels fitted with Toyo R888 R-Compound tires.

The interior comes with a number of upgrades, too – Buddy Club racing seats, a roll cage and a Racepack IQ3 digital dash. There are also carbon fiber elements and unique door pad inserts.

httpv://www.youtube.com/watch?v=FcHlQiWNkQY

Source: Hyundai

November 7, 2013

Volkswagen Twin-Up Diesel-Electric Hybrid

Volkswagen has announced the Twin-Up diesel-electric hybrid concept. The super-efficient small car will probably become a production model.

The Twin-Up has two-cylinder 0.8 liter common-rail diesel engine from the XL1 – 47HP (35 kW) and 120Nm (88 lb-ft) of torque. There is also an electric motor with 47HP (35 kW) and 140Nm (103 lb-ft). The combined power is 74HP (55 kW) and 214Nm (158 lb-ft), which is sent to the front axle through a dual-clutch 7-speed gearbox. 0-100 km/h in 15.7 seconds and a top speed of 140 km/h (87 mph) – electronically limited in hybrid mode. Still, this car is not about performance, it is about low fuel consumption – 1.1 liter / 100 km (257 mpg UK or 214 mpg US) with CO2 emissions of only 27 g/km. Furthermore, it has an all-electric range of up to 50 km (31 miles).

The Volkswagen Twin-Up is 1,205 kg (2,656 lbs), which is 410 kg (904 lbs) heavier than the revolutionary XL1. It has an 8.6 kWh battery pack and 33 liters diesel fuel tank, which is 23 liters bigger than the one in the XL1.

The manufacturer has announced plans to show a more production-oriented Twin-Up concept later this month at the 2013 Tokyo Motor Show.

Source: Volkswagen

November 7, 2013

Porsche 997 Turbo S With Stage 3 Kit By McChip-DKR

McChip-DKR Porsche 997 Turbo S is a vehicle which was tuned specially for track day events. The specialists at the tuning company McChip-DKR are proficient in the fields of power improvements and that is why they decided to give this sixth generation nine-eleven 2012 model some new characteristics.

The production Porsche is equipped with 3.8 Turbo DFI engine, but the McChip-DKR decided to improve it by giving it a Stage-3-Kit. Hence, the serial 530 horsepower (390 kW) and 700 Nm (517 lb-ft) of max torque were enhanced by a modified engine management with software adaptation, an exhaust system with sports cats and header designed by Michael SCHNARR from the CARGRAPHIC company.

The result is up to 600 horsepower (441 kW) and 815 Nm (605 lb-ft) of max torque as well as a mighty sound. Furthermore, to make it more safety due to the increase of power, the tuners have equipped the Porsche with HEGEMANN rollover cage.

In addition, the sliding roof has been exchanged against carbon top. The needed reduction in weight, typical for every sportscar modification, was achieved via the Makrolon material used for the manufacturing of the rear window.

In terms of chassis, there were utilized PASM coilovers delivered by Bilstein. The splendid wheel-tire-combination, consisting of original Porsche 997 GT2 RS rims with Michelin Cup tires was left untouched.

The interior of the vehicle was also transformed. To be more precise, the seats in the inner of the bolide have been changed with a sophisticated combintion of Alcantara and leather upholstered Recaro SPG shell type racing seats. Many car pieces were also painted in the color of the car.

Source: McChip-DKR via Miranda Media

November 6, 2013

Toyota To Make Five Global Debuts At Tokyo Motor Show

Toyota is going to make five world-premieres of concept vehicles at this year’s Tokyo Motor Show, which will start on 20th of November in the Japanese city. All of the concepts were created under the slogan “Fun to Drive, Again” which conveys brand’s vision of a future mobility society that values the joy of driving.

The concepts on display at the event are: Toyota FCV (Fuel Cell Vehicle) Concept, Toyota FV2 (Fun Vehicle 2), Toyota JPN Taxi Concept, Toyota Voxy Concept and Noah Concept, Toyota Aqua G Sports Compact Sports Hybrid, Toyota i-Road and at last but not least – Toyota FT-86 Open Concept.
The first global debut is for Toyota FCV which is a practical concept of the fuel cell vehicle Toyota plans to launch around 2015. It is powered by hydrogen and has a driving range of at least 500 km and refueling times as low as three minutes.

The vehicle’s exterior design is inspired by the transformation of air into water as the system produces electricity, as well as the powerful acceleration enabled by the electric drive motor. The bold front view includes pronounced air intakes.

The car also has sleek sides that convey the air-to-water transformation with its flowing-liquid door profile and wave-motif fuel cap. The same theme is used for the creation of the rear, which conveys a catamaran’s stern and the flow of water behind.

The vehicle can perfectly accommodate four persons thanks to the special design body beneath which are positioned the light-weight FC Stack and two 70 MPa high-pressure hydrogen tanks.
The Toyota FC Stack has a power output density of 3 kW/L as well as an output of at least 136 hp (100 kW). The FC system is equipped with Toyota’s high-efficiency boost converter.
Toyota FCV Concept Dimensions:

Length(mm)	Width (mm)	Height (mm)	Wheelbase (mm)	Occupancy
4,870	1,810	1,535	2,780	4

The next world premiere is for Toyota FV2 which is a very special concept car that shows the brand’s vision for the future. It is interesting that this concept does not use a steering wheel, but operates by the driver shifting their body to intuitively move the vehicle forward and back, left and right.

Furthermore, by the utilization of intelligent transport system technology to connect with other vehicles in the area and traffic infrastructure, Toyota FV2 provides the perfect safety driving. In such cases it signals with various advanced warnings about vehicles in blind spots at intersections.

What is even more spectacular here is that Toyota envisions an ever-developing driver-vehicle relationship. This will happen via the incorporation of “Toyota Heart Project”. To be more precise, the vehicle uses voice and image recognition to determine the driver’s mood, accumulated driving history to suggest destinations, and driving skill information. In addition to an augmented reality (AR) display on the windshield, the body color and exterior display can be changed at will.

Toyota FV2 Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
3,000	1,600	990 (sleep mode)	2,360	1
		1,780 (driving mode)

The third concept vehicle is Toyota’s vision for a new Taxi: the JPN Taxi Concept. You can follow the highlighted link and read about it in details.
Toyota JPN Taxi Concept Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
4,350	1,695	1,700	2,750	5

The next premieres are for the Toyota Voxy Concept and Noah Concept which are the next-generation spacious minivans that offer a roomy interior needed demanded by families. To the vehicles has been added low-floor package which creates a class-leading roomy interior with outstanding ease of ingress and egress.

Furthermore, these Toyota concepts are seven-seaters that include ultra-long sliding Captain Seats in the second row, providing a diverse range of seating arrangements. They are equipped with a 2.0-liter gasoline engine variant and a 1.8-liter hybrid variant with a full hybrid system.
The front end of the Noah Concept is sophisticated while the Voxy Concept employs exclusive aerodynamic parts to emphasize the low center of gravity, impressive wide-body, and the overwhelming sense of presence. Market versions of the vehicles are planned for launch in the Japanese market in early 2014.
Toyota Voxy Concept and Noah Concept Dimensions:

Vehicle	Length (mm)	Width(mm)	Height (mm)	Wheelbase (mm)	Occupancy
Voxy Concept (as pictured)	4,710	1,730	1,825	2,850	7
Noah Concept (as pictured)	4,695	1,695	1,825	2,850	7

The fifth model in the line of concept vehicles is Aqua G Sports which has a powerful, sleek and inspiring design and excellent fuel efficiency. Moreover, the car has been fully tuned by GAZOO Racing and its market version will be launched in the Japanese market in late November.

Toyota Aqua G Sports Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase (mm)	Occupancy
4,055	1,695	1,420	2,550	5

Toyota i-Road Concept is not an unfamiliar vehicle, because it made its debut at the Geneva Motor Show. Now, this ultra-compact mobility car is ready to conquer Japan.

Toyota i-Road Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
2,350	850	1,445	1,700	2

At last, Toyota FT-86 Open Concept is based on the rear-wheel-drive 86 sports car. It includes an electrically operated soft top, as well as a new “Flash Red” body color, which was used specifically for the Tokyo Motor Show.

FT-86 Open Concept Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
4,240	1,775	1,270	2,570	4

Source: Toyota

November 6, 2013

Mazda Concepts At 2013 SEMA Show

Four Mazda concept vehicles created by Mazda North American Operations’ (MNAO) made their official debuts at the annual Specialty Equipment Market Association (SEMA) Show. As a basis were used 2014 Mazda3 and Mazda6 vehicles, which were refreshed in terms of design and performance.

Both a Mazda3 and Mazda6 were given “Club Sport” treatment. The general theme is a motorsports-inspired motif of neutral grays, blacks and reds. This includes Mazda Design-exclusive Composite Grey finish and Brilliant Black rooftop.

The Club Sport 6 Concept is equipped with a 14.0:1 low-compression SKYACTIV-D 2.2-liter clean diesel engine, which produces 175 horsepower (129 kW) at 4,500 rpm and 420 Nm (310 lb-ft) of torque at 2,000 rpm.

The exterior paint is adorned with custom Club Sport graphics that include varying line frequency and width to create a sense of motion. Front, rear and side diffusers, and rear spoiler were also installed as a part of Mazda Design custom accessory aero kit. They were decided in a contrasting Brilliant Black gloss.

The Club Sport 6 vehicle runs on Rays 57 Motorsport G07FXX 20-inch Black and Machining-colored 10-spoke wheels coupled with sticky Yokohama S.drive 245/35R20 tires. New suspension is also at hand – H&R spring kit, while custom Brembo two-piece, six-piston 380×32 drilled brake rotors and a Racing Beat exhaust round out the entire sports-treatment.

Next, the Mazda Club Sport 3 Concept’s design is very similar to the previous one, but has a few extra robust features. Its exterior is decided in Slate White exterior finish, complemented by Metallic Silver lines that trace along the arches of the wheels, the base of the side skirts and the contours of the doors and C-pillars.

Contrasting texture and dynamic flow is delivered by the Vibrant Red vinyl which follows along with thin lines. Left unpainted are the dramatic alpha and numeric Black vinyl call-outs of the fuel door, tire size and SKYACTIV1 TECHNOLOGY pronounced across the hood.

Here was also used the aero kit which features Brilliant Black front, rear and side diffusers as well as a new rear spoiler style. The vehicle hides under its hood is SKYACTIV-G 2.5-liter gasoline engine, coupled with tuned SKYACTIV-Drive six-speed manual transmission.

The unit utilizes short 4.7:1 final drive ratio and a Wavetrac helical limited-slip differential for additional torque. Enhancements in terms of performance include a CUSCO coilover kit, a Racing Beat performance exhaust and Brembo two-piece, six-piston 380×32 drilled brake rotors.

This Mazda runs on Rays 57 Motorsport G07FXX 20-inch Black and Machining-colored 10-spoke wheels wrapped in Bridgestone Potenza RE-11 235/35R19 road-gripping performance tires.

The interior of the car features Red aniline leather treatment throughout – seat trim, door panel inserts, center console, IP decor and a steering wheel stripe. The steering wheel, arm rest, emergency brake and shifter boot are wrapped in Premium Black leather to make the perfect contrast.

Moreover, the front seats include perforated leather within the seat bolsters with a diffusing line pattern in the seat back creating a “3,” identical to the Metallic Silver numeral painted onto the vehicle’s driver’s side door.

Trapezoidal Momo-inspired contrast-Red stitching is visible on the steering wheel and double-stitched tonal deck seams on the doors, seats and IP. The steering wheel also features a single Red aniline leather strip at the minimalist but top-of-mind high-noon position.

The third vehicle is the Vector 3 Concept that offers a base exterior color decided in Soul Red. Mazda Design custom blend of Deep Crimson in varying shades of depth highlight the “fractured line” treatment of the paint finish’s vector pattern.

The car sits on a set of Rays Volk Racing Original G25 19-inch wheels. They were encased in road-hugging Yokohama S.drive 225/40R19 performance tires. Other performance enhancemets feature an H&R spring kit and Brembo two-piece custom four-piston 365×29 drilled rotors.

The last concept shown at SEMA is the Ceramic 6 Concept which continues the design philosophy of the Vector 3. Here, the exterior patterns are identical on both sides, and also come to revoke the racing spirit of the model.

The exterior paint finish is Ceramic White littered with Taupe Silver accent stripes. The vehicle’s matte white finish was achieved via the utilization of a base metallic followed by a satin quality clear paint.

The exquisite Ceramic 6 rides on Rays Volk Racing Original G25 10-spoke, 20-inch wheels finished in Taupe Silver. Additional performance accessories include an H&R spring kit, a Racing Beat custom dual-exhaust and custom Brembo two-piece, six-piston 380×32 drilled rotors.

Going inside the concept, one sees premium soft leathers, intricate stitching and overlapping weave patterns. The interior of the car is wrapped all-around in supple full-grain leather in White, while Black leather is used for the steering wheel, arm rests, emergency brake and center console.

Accents are provided via metallic details. In addition, the steering wheel also includes Light White Momo-style stitching and it is finished with a matching leather strip at the high-noon position.

The front and rear seat inserts include interwoven light and dark White leather. At the same time, the hand-sewn Burgundy stitching additionally highlights the dynamic contrasting design. Light White leather inserts featuring the same hand-sewn Burgundy stitching pattern adorn the doors. It is also featured along the instrument panel décor.

Source: Mazda

November 6, 2013

2014 BMW S 1000 R – 160HP and 112Nm

BMW has announced the new 2014 S 1000 R, which is directly derived from the S 1000 RR superbike and uses the same innovative technology. The simplified appearance of the new S 1000 R exudes an aggressive, dynamic energy.

The engine is a 1.0 liter (999 cc) four-cylinder with 160HP (118 kW) at 11,000 RPM and 112Nm (83 lb-ft) at 9,250 RPM. It provides punchy low-end response that is ideal on twisty single-lane roads. Among other things, this was achieved by using redesigned cylinder head ducts, modified cam profiles and appropriately modified engine management. The new BMS-X engine management system also supports an E-Gas “throttle-by-wire” system.

The S 1000 R comes with two riding modes and ASC (Automatic Stability Control) as standard. The “Rain” and “Road” modes cater to different road surface conditions using different power and torque curves, and applying different levels of Race ABS and ASC intervention. This provides an important safety bonus, particularly under variable road conditions.

Dynamic Traction Control (DTC), incorporating two additional riding modes – “Dynamic” and “Dynamic Pro” – is available as a factory option. This option allows riders to make the most of the S 1000 R’s sporty performance potential both on the road and on the race track. Dynamic Traction Control, which includes a lean angle sensor, offers safe and dynamic acceleration which is currently state-of-the-art for a production motorcycle.

The new S 1000 R’s sports roadster personality is also mirrored in the styling. With its “tail up – nose down” stance, the S 1000 R’s appearance immediately suggests aggressive performance and dynamism. Like the RR, the S 1000 R, too, is distinctive and instantly recognizable. It has a face that stands out in a crowd.

Race-inspired features also extend to the cockpit of the S 1000 R. With an LC display with analog tachometer, the instrumentation offers an unrivalled amount of information in this segment, from the gear display and riding mode display to a lap timer. For optimal gear changes, an individually programmable shift indicator light is installed.

Options:

• Sports package with Dynamic Traction Control (DTC), Riding mode Pro (“Dynamic”, “Dynamic Pro”), gear shift assistant and cruise control.

• Dynamic package with Dynamic Damping Control (DDC), heated grips and small engine spoiler in matching bike color.

Accessories:

Safety/performance.

• DTC and Riding mode Pro.

• Cruise control.

• Engine crash pads.

• Axle sliders.

• Anti-theft alarm system.

Storage.

• Tank Bag.

• Rear Tailbag.

Design.

• HP Carbon tank cover left/right.

• HP Carbon airbox cover.

• HP Carbon front mudguard.

• HP Carbon rear mudguard.

• HP Carbon chain guard.

• Tail cover.

• Engine spoiler.

• HP Race Cover Kit.

Sound.

• HP full titanium exhaust system 4.5 kg (9.9 lbs) lighter than the standard system.

• Akrapović sports silencer.

Ergonomics and comfort.

• HP Race footrest plate.

• HP Race rider footrest system.

• HP pillion footrests.

• HP gear shift assistant.

• HP folding clutch lever.

• HP folding handbrake lever.

• Sport windscreen.

• Rider’s comfort seat.

• Pillion seat with enhanced comfort.

• Heated grips.

Navigation and Communication.

• BMW Motorrad Navigator.

• Navigator cradle, cable and mounting kit.

Maintenance and technology.

• HP lap timer.

• HP Race data logger.

• HP forged wheels.

• Sport work stand.

• Swingarm adapter for Sport work stand.

• Motorcycle cover.

• HP tire warmers.

• HP brake remote adjustment.

• HP Race pit-stop carpet.

Rider’s accessories.

• Sport suit.

• Sport boots.

• 2 in 1 gloves

Source: BMW

November 6, 2013

Acura Displays Three Customized Sedans At SEMA

At SEMA Show, the powerful Acura brand has just unveiled three customized sedans: Acura RLX VIP Sedan created by Evasive Motorsports, RLX Urban Luxury Sedan and Street Performance ILX both modified by MAD Industries.

As a platform MAD Industries and Evasive Motorsports used Acura sedans to create even more exciting and dynamic custom vehicles. The firs one – 2014 Acura RLX VIP Sedan by Evasive Motorsports was designed with the aim to be equally comfortable for daily utilization as well as for more important urban activities.

Te modifications here include custom carbon fiber front bumper lip and vents, a modified rear bumper and fabricated exhaust system with titanium tips. What rounds-out the esterior enhancements are Chargespeed side skirts combined with a deck lid spoiler and splash guards from Acura Genuine Accessories

In addition, Nano-Fusion Film was used in order to deliver better protection of the paint on the front end. The wheels on which this VIP automobile runs are 21-inch Advan F15 wrapped in 245/35ZR-21 Continental ExtremeContact DW tires.

The lowering of the body was made possible via the prototype Tein Street Flex coilovers. Four-pot Project Mu calipers and brake pads, and Evasive-spec brake rotors sit behind the front wheels. The interior modifications feature custom neck pillows wrapped in Jordan Brand-inspired elephant print.

Powertrain Modifications:

Custom Evasive Motorsports exhaust
Quad titanium exhaust tips

Chassis/Suspension Modifications:

21 x 9-inch (+35mm offset) AVS Model F15 wheels
245/35ZR-21 Continental ExtremeContact DW tires
Prototype Tein Street Flex Coilovers
Project Mu 4-piston big brake kit
Project Mu NS400 brake pads
Custom Evasive-spec brake rotors

Exterior Modifications:

Custom carbon fiber front chin spoiler

Custom carbon fiber front bumper vents
Chargespeed carbon fiber side skirts
Acura Genuine Accessories deck lid spoiler
Acura Genuine Accessories splash guard set
Muteki SR48 Lugs
S&A Design vinyl stickers
Nano-Fusion paint protection film

Interior Modifications:

Custom Jordan Brand-inspired elephant print neck pillows

The second vehicle displayed at the show is the 2014 Acura RLX Urban Luxury Sedan, created by MAD Industries. Its design speaks of every-day utilization. In terms of exterior look, the tuners used Acura Genuine Accessory decklid spoiler and 3M 1080 Scotchprint wrap film, in brushed black metallic with gloss black accents.

What completes the visual stance of the car is the 3M Color Stable window film and the Silver 22-inch Niche wheels wrapped in Nitto Invo tires. Complementing the wheels, MPG custom satin black caliper covers finish off the exterior details. For the interior, the designers added 3M brushed black metallic film door and trim accents.

Chassis/Suspension Modifications:

22 x 9-inch Niche Apex-M125 silver & machined wheels
265/30ZR-22 Nitto Invo luxury sport performance tires
MPG Custom satin black caliper covers

Exterior Modifications:

Acura Genuine Accessories deck lid spoiler

Interior Modifications:

3M 1080 Scotchprint wrap film series in brushed metallic – 1080-BR212

The other vehicle created by MAD Industries is the Acura Street Performance ILX which was designed to appeal to those searching for a fun car that feels at home on city streets or a curvy mountain pass. As one can see, the vehicle is wrapped in matte copper metallic and accented by matte charcoal metallic 3M Scotchprint 1080 film.

Acura’s Genuine Accessories aero kit perfectly complements the set of 19-inch TSW Max wheels wrapped in Nitto NT05 Max high performance tires. The aggressive stance of the car is enhanced by Tein Super Street coilovers which in addition improve the dampening during spirited driving.

The powertrain of this Acura was also tuned via a supercharger kit from CT Engineering and an ECU tune with Hondata’s FlashPro. The result is that the ILX’s 2.4-liter Inline-4 pump out 250 wheel horsepower (184 kW). The prototype SP Elite exhaust from Greddy adds a throaty exhaust note.

Powertrain Modifications:

CT Engineering supercharger kit
CT Engineering intake
Hondata FlashPro
Greddy SP Elite prototype exhaust
K&N high performance air filter
AMSOIL Dominator motor oil

Chassis/Suspension Modifications:

19 x 8.5 TSW Max matte black wheels
245/35R-19 Nitto NT05 Max tires
Tein Super Street coilovers
Stoptech Big Brake kit
MPG custom satin black caliper covers

Exterior Modifications:

3M 1080 Scotchprint wrap film: copper metallic 1080-M229 and charcoal metallic 1080-M211 installed by Paradise Moterwerks
PIAA 9006 low beam and 9005 high beam Extreme White headlight bulbs. H11 fog lamps and Terra LED dome light bulbs.
Acura Genuine Accessories front underbody spoiler
Acura Genuine Accessories side underbody spoiler
Acura Genuine Accessories rear underbody spoiler
Acura Genuine Accessories deck lid spoiler
Acura Genuine Accessories body side molding

Interior Modifications:

CT Engineering short-shift kit
Acura Genuine Accessories illuminated door sill
Acura Genuine Accessories trunk tray

Source: Acura

November 6, 2013

Ringbrothers Ford Mustang Blizzard – 710HP

Ringbrothers have unveiled their Ford Mustang Blizzard for 2013 SEMA. It boasts brilliant white paint job and super powerful V8.

Blizzard gets its power from a highly modified 351-based 427cid V8 engine NASCAR Sprint Cup Series style engine build by Wegner Motorsports. Induction is handled by a Holley carburetor and exhaust is funneled through Flowmaster Mufflers. Ringbrothers has also installed a Be Cool radiator and fan setup that keep the engine running at its optimal temperature while Royal Purple lubricants work to keep everything running smoothly. The result is 710HP (529 kW) sent to the rear wheels through a Bowler 5-speed manual transmission and a John’s Industry limited-slip differential.

Putting all of the power to the ground are a set of HRE 560R forged wheels shod in Nitto Invo tires that measure 265 up front and 325 out back. Inside of the wheels, Baer six-piston calipers bring this pony to a stop from full gallop without even breaking a sweat. The car is actually setup to handle as well as the Stock Cars that inspired its engine thanks to a Detroit Speed & Engineering front coilover and rear Quadralink suspension with AFCO shocks and DSE sway bars.

Source: Ford

November 6, 2013

2014 Jaguar F-Type Coupe [teaser]

Jaguar has published the first teaser picture of the upcoming 2014 F-Type Coupe. The sports car will make its official debut on November 19^th at the Los Angeles Auto Show.

The all-aluminum F-TYPE Coupe range will deliver in production form the uncompromised design vision of the Jaguar C-X16 concept, and will complement the existing F-TYPE Convertible, winner of the 2013 ‘World Car Design of the Year’ award. The F-TYPE Coupe will go on sale in North America in spring 2014.

The engine range will be the same as roadster’s one – 3.0 liter supercharged V6 with 340HP (250 kW) or 380HP (279 kW) and a mighty 5.0 liter supercharged V8 with 495HP (364 kW).

“The excitement generated when we revealed the C-X16 concept was terrific; so to now be on the cusp of what I can assure you will be a drama-filled reveal event in Los Angeles for F-TYPE Coupe is a very significant moment.”, commented Ian Callum, Director of Design, Jaguar.

“We’ve been overwhelmed by the positive reaction to the F-TYPE Convertible, but for me the purity of creating a sports Coupe is a uniquely satisfying process – and I know that both visually and dynamically, F-TYPE Coupe raises the bar yet again.”, he finished.

Source: Jaguar

November 6, 2013

Category: Auto News