Author: Lidia Todorova

Toyota To Make Five Global Debuts At Tokyo Motor Show

Toyota is going to make five world-premieres of concept vehicles at this year’s Tokyo Motor Show, which will start on 20th of November in the Japanese city. All of the concepts were created under the slogan “Fun to Drive, Again” which conveys brand’s vision of a future mobility society that values the joy of driving.

The concepts on display at the event are: Toyota FCV (Fuel Cell Vehicle) Concept, Toyota FV2 (Fun Vehicle 2), Toyota JPN Taxi Concept, Toyota Voxy Concept and Noah Concept, Toyota Aqua G Sports Compact Sports Hybrid, Toyota i-Road and at last but not least – Toyota FT-86 Open Concept.
The first global debut is for Toyota FCV which is a practical concept of the fuel cell vehicle Toyota plans to launch around 2015. It is powered by hydrogen and has a driving range of at least 500 km and refueling times as low as three minutes.

The vehicle’s exterior design is inspired by the transformation of air into water as the system produces electricity, as well as the powerful acceleration enabled by the electric drive motor. The bold front view includes pronounced air intakes.

The car also has sleek sides that convey the air-to-water transformation with its flowing-liquid door profile and wave-motif fuel cap. The same theme is used for the creation of the rear, which conveys a catamaran’s stern and the flow of water behind.

The vehicle can perfectly accommodate four persons thanks to the special design body beneath which are positioned the light-weight FC Stack and two 70 MPa high-pressure hydrogen tanks.
The Toyota FC Stack has a power output density of 3 kW/L as well as an output of at least 136 hp (100 kW). The FC system is equipped with Toyota’s high-efficiency boost converter.
Toyota FCV Concept Dimensions:

Length(mm)	Width (mm)	Height (mm)	Wheelbase (mm)	Occupancy
4,870	1,810	1,535	2,780	4

The next world premiere is for Toyota FV2 which is a very special concept car that shows the brand’s vision for the future. It is interesting that this concept does not use a steering wheel, but operates by the driver shifting their body to intuitively move the vehicle forward and back, left and right.

Furthermore, by the utilization of intelligent transport system technology to connect with other vehicles in the area and traffic infrastructure, Toyota FV2 provides the perfect safety driving. In such cases it signals with various advanced warnings about vehicles in blind spots at intersections.

What is even more spectacular here is that Toyota envisions an ever-developing driver-vehicle relationship. This will happen via the incorporation of “Toyota Heart Project”. To be more precise, the vehicle uses voice and image recognition to determine the driver’s mood, accumulated driving history to suggest destinations, and driving skill information. In addition to an augmented reality (AR) display on the windshield, the body color and exterior display can be changed at will.

Toyota FV2 Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
3,000	1,600	990 (sleep mode)	2,360	1
		1,780 (driving mode)

The third concept vehicle is Toyota’s vision for a new Taxi: the JPN Taxi Concept. You can follow the highlighted link and read about it in details.
Toyota JPN Taxi Concept Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
4,350	1,695	1,700	2,750	5

The next premieres are for the Toyota Voxy Concept and Noah Concept which are the next-generation spacious minivans that offer a roomy interior needed demanded by families. To the vehicles has been added low-floor package which creates a class-leading roomy interior with outstanding ease of ingress and egress.

Furthermore, these Toyota concepts are seven-seaters that include ultra-long sliding Captain Seats in the second row, providing a diverse range of seating arrangements. They are equipped with a 2.0-liter gasoline engine variant and a 1.8-liter hybrid variant with a full hybrid system.
The front end of the Noah Concept is sophisticated while the Voxy Concept employs exclusive aerodynamic parts to emphasize the low center of gravity, impressive wide-body, and the overwhelming sense of presence. Market versions of the vehicles are planned for launch in the Japanese market in early 2014.
Toyota Voxy Concept and Noah Concept Dimensions:

Vehicle	Length (mm)	Width(mm)	Height (mm)	Wheelbase (mm)	Occupancy
Voxy Concept (as pictured)	4,710	1,730	1,825	2,850	7
Noah Concept (as pictured)	4,695	1,695	1,825	2,850	7

The fifth model in the line of concept vehicles is Aqua G Sports which has a powerful, sleek and inspiring design and excellent fuel efficiency. Moreover, the car has been fully tuned by GAZOO Racing and its market version will be launched in the Japanese market in late November.

Toyota Aqua G Sports Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase (mm)	Occupancy
4,055	1,695	1,420	2,550	5

Toyota i-Road Concept is not an unfamiliar vehicle, because it made its debut at the Geneva Motor Show. Now, this ultra-compact mobility car is ready to conquer Japan.

Toyota i-Road Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
2,350	850	1,445	1,700	2

At last, Toyota FT-86 Open Concept is based on the rear-wheel-drive 86 sports car. It includes an electrically operated soft top, as well as a new “Flash Red” body color, which was used specifically for the Tokyo Motor Show.

FT-86 Open Concept Dimensions:

Length(mm)	Width(mm)	Height(mm)	Wheelbase(mm)	Occupancy
4,240	1,775	1,270	2,570	4

Source: Toyota

Mazda Concepts At 2013 SEMA Show

Four Mazda concept vehicles created by Mazda North American Operations’ (MNAO) made their official debuts at the annual Specialty Equipment Market Association (SEMA) Show. As a basis were used 2014 Mazda3 and Mazda6 vehicles, which were refreshed in terms of design and performance.

Both a Mazda3 and Mazda6 were given “Club Sport” treatment. The general theme is a motorsports-inspired motif of neutral grays, blacks and reds. This includes Mazda Design-exclusive Composite Grey finish and Brilliant Black rooftop.

The Club Sport 6 Concept is equipped with a 14.0:1 low-compression SKYACTIV-D 2.2-liter clean diesel engine, which produces 175 horsepower (129 kW) at 4,500 rpm and 420 Nm (310 lb-ft) of torque at 2,000 rpm.

The exterior paint is adorned with custom Club Sport graphics that include varying line frequency and width to create a sense of motion. Front, rear and side diffusers, and rear spoiler were also installed as a part of Mazda Design custom accessory aero kit. They were decided in a contrasting Brilliant Black gloss.

The Club Sport 6 vehicle runs on Rays 57 Motorsport G07FXX 20-inch Black and Machining-colored 10-spoke wheels coupled with sticky Yokohama S.drive 245/35R20 tires. New suspension is also at hand – H&R spring kit, while custom Brembo two-piece, six-piston 380×32 drilled brake rotors and a Racing Beat exhaust round out the entire sports-treatment.

Next, the Mazda Club Sport 3 Concept’s design is very similar to the previous one, but has a few extra robust features. Its exterior is decided in Slate White exterior finish, complemented by Metallic Silver lines that trace along the arches of the wheels, the base of the side skirts and the contours of the doors and C-pillars.

Contrasting texture and dynamic flow is delivered by the Vibrant Red vinyl which follows along with thin lines. Left unpainted are the dramatic alpha and numeric Black vinyl call-outs of the fuel door, tire size and SKYACTIV1 TECHNOLOGY pronounced across the hood.

Here was also used the aero kit which features Brilliant Black front, rear and side diffusers as well as a new rear spoiler style. The vehicle hides under its hood is SKYACTIV-G 2.5-liter gasoline engine, coupled with tuned SKYACTIV-Drive six-speed manual transmission.

The unit utilizes short 4.7:1 final drive ratio and a Wavetrac helical limited-slip differential for additional torque. Enhancements in terms of performance include a CUSCO coilover kit, a Racing Beat performance exhaust and Brembo two-piece, six-piston 380×32 drilled brake rotors.

This Mazda runs on Rays 57 Motorsport G07FXX 20-inch Black and Machining-colored 10-spoke wheels wrapped in Bridgestone Potenza RE-11 235/35R19 road-gripping performance tires.

The interior of the car features Red aniline leather treatment throughout – seat trim, door panel inserts, center console, IP decor and a steering wheel stripe. The steering wheel, arm rest, emergency brake and shifter boot are wrapped in Premium Black leather to make the perfect contrast.

Moreover, the front seats include perforated leather within the seat bolsters with a diffusing line pattern in the seat back creating a “3,” identical to the Metallic Silver numeral painted onto the vehicle’s driver’s side door.

Trapezoidal Momo-inspired contrast-Red stitching is visible on the steering wheel and double-stitched tonal deck seams on the doors, seats and IP. The steering wheel also features a single Red aniline leather strip at the minimalist but top-of-mind high-noon position.

The third vehicle is the Vector 3 Concept that offers a base exterior color decided in Soul Red. Mazda Design custom blend of Deep Crimson in varying shades of depth highlight the “fractured line” treatment of the paint finish’s vector pattern.

The car sits on a set of Rays Volk Racing Original G25 19-inch wheels. They were encased in road-hugging Yokohama S.drive 225/40R19 performance tires. Other performance enhancemets feature an H&R spring kit and Brembo two-piece custom four-piston 365×29 drilled rotors.

The last concept shown at SEMA is the Ceramic 6 Concept which continues the design philosophy of the Vector 3. Here, the exterior patterns are identical on both sides, and also come to revoke the racing spirit of the model.

The exterior paint finish is Ceramic White littered with Taupe Silver accent stripes. The vehicle’s matte white finish was achieved via the utilization of a base metallic followed by a satin quality clear paint.

The exquisite Ceramic 6 rides on Rays Volk Racing Original G25 10-spoke, 20-inch wheels finished in Taupe Silver. Additional performance accessories include an H&R spring kit, a Racing Beat custom dual-exhaust and custom Brembo two-piece, six-piston 380×32 drilled rotors.

Going inside the concept, one sees premium soft leathers, intricate stitching and overlapping weave patterns. The interior of the car is wrapped all-around in supple full-grain leather in White, while Black leather is used for the steering wheel, arm rests, emergency brake and center console.

Accents are provided via metallic details. In addition, the steering wheel also includes Light White Momo-style stitching and it is finished with a matching leather strip at the high-noon position.

The front and rear seat inserts include interwoven light and dark White leather. At the same time, the hand-sewn Burgundy stitching additionally highlights the dynamic contrasting design. Light White leather inserts featuring the same hand-sewn Burgundy stitching pattern adorn the doors. It is also featured along the instrument panel décor.

Source: Mazda

Acura Displays Three Customized Sedans At SEMA

At SEMA Show, the powerful Acura brand has just unveiled three customized sedans: Acura RLX VIP Sedan created by Evasive Motorsports, RLX Urban Luxury Sedan and Street Performance ILX both modified by MAD Industries.

As a platform MAD Industries and Evasive Motorsports used Acura sedans to create even more exciting and dynamic custom vehicles. The firs one – 2014 Acura RLX VIP Sedan by Evasive Motorsports was designed with the aim to be equally comfortable for daily utilization as well as for more important urban activities.

Te modifications here include custom carbon fiber front bumper lip and vents, a modified rear bumper and fabricated exhaust system with titanium tips. What rounds-out the esterior enhancements are Chargespeed side skirts combined with a deck lid spoiler and splash guards from Acura Genuine Accessories

In addition, Nano-Fusion Film was used in order to deliver better protection of the paint on the front end. The wheels on which this VIP automobile runs are 21-inch Advan F15 wrapped in 245/35ZR-21 Continental ExtremeContact DW tires.

The lowering of the body was made possible via the prototype Tein Street Flex coilovers. Four-pot Project Mu calipers and brake pads, and Evasive-spec brake rotors sit behind the front wheels. The interior modifications feature custom neck pillows wrapped in Jordan Brand-inspired elephant print.

Powertrain Modifications:

Custom Evasive Motorsports exhaust
Quad titanium exhaust tips

Chassis/Suspension Modifications:

21 x 9-inch (+35mm offset) AVS Model F15 wheels
245/35ZR-21 Continental ExtremeContact DW tires
Prototype Tein Street Flex Coilovers
Project Mu 4-piston big brake kit
Project Mu NS400 brake pads
Custom Evasive-spec brake rotors

Exterior Modifications:

Custom carbon fiber front chin spoiler

Custom carbon fiber front bumper vents
Chargespeed carbon fiber side skirts
Acura Genuine Accessories deck lid spoiler
Acura Genuine Accessories splash guard set
Muteki SR48 Lugs
S&A Design vinyl stickers
Nano-Fusion paint protection film

Interior Modifications:

Custom Jordan Brand-inspired elephant print neck pillows

The second vehicle displayed at the show is the 2014 Acura RLX Urban Luxury Sedan, created by MAD Industries. Its design speaks of every-day utilization. In terms of exterior look, the tuners used Acura Genuine Accessory decklid spoiler and 3M 1080 Scotchprint wrap film, in brushed black metallic with gloss black accents.

What completes the visual stance of the car is the 3M Color Stable window film and the Silver 22-inch Niche wheels wrapped in Nitto Invo tires. Complementing the wheels, MPG custom satin black caliper covers finish off the exterior details. For the interior, the designers added 3M brushed black metallic film door and trim accents.

Chassis/Suspension Modifications:

22 x 9-inch Niche Apex-M125 silver & machined wheels
265/30ZR-22 Nitto Invo luxury sport performance tires
MPG Custom satin black caliper covers

Exterior Modifications:

Acura Genuine Accessories deck lid spoiler

Interior Modifications:

3M 1080 Scotchprint wrap film series in brushed metallic – 1080-BR212

The other vehicle created by MAD Industries is the Acura Street Performance ILX which was designed to appeal to those searching for a fun car that feels at home on city streets or a curvy mountain pass. As one can see, the vehicle is wrapped in matte copper metallic and accented by matte charcoal metallic 3M Scotchprint 1080 film.

Acura’s Genuine Accessories aero kit perfectly complements the set of 19-inch TSW Max wheels wrapped in Nitto NT05 Max high performance tires. The aggressive stance of the car is enhanced by Tein Super Street coilovers which in addition improve the dampening during spirited driving.

The powertrain of this Acura was also tuned via a supercharger kit from CT Engineering and an ECU tune with Hondata’s FlashPro. The result is that the ILX’s 2.4-liter Inline-4 pump out 250 wheel horsepower (184 kW). The prototype SP Elite exhaust from Greddy adds a throaty exhaust note.

Powertrain Modifications:

CT Engineering supercharger kit
CT Engineering intake
Hondata FlashPro
Greddy SP Elite prototype exhaust
K&N high performance air filter
AMSOIL Dominator motor oil

Chassis/Suspension Modifications:

19 x 8.5 TSW Max matte black wheels
245/35R-19 Nitto NT05 Max tires
Tein Super Street coilovers
Stoptech Big Brake kit
MPG custom satin black caliper covers

Exterior Modifications:

3M 1080 Scotchprint wrap film: copper metallic 1080-M229 and charcoal metallic 1080-M211 installed by Paradise Moterwerks
PIAA 9006 low beam and 9005 high beam Extreme White headlight bulbs. H11 fog lamps and Terra LED dome light bulbs.
Acura Genuine Accessories front underbody spoiler
Acura Genuine Accessories side underbody spoiler
Acura Genuine Accessories rear underbody spoiler
Acura Genuine Accessories deck lid spoiler
Acura Genuine Accessories body side molding

Interior Modifications:

CT Engineering short-shift kit
Acura Genuine Accessories illuminated door sill
Acura Genuine Accessories trunk tray

Source: Acura

Chevrolet Silverado Cheyenne Concept Debuts At SEMA Show

Chevrolet Silverado Cheyenne Concept vehicle makes a debut today at the popular SEMA Show. This is a performance-oriented version of the new 2014 Silverado, however it combines reduced curb weight with the performance of the new 420-horsepower 6.2L V-8 engine.

In addition, the tuned model also includes lowered ride height, a rear stabilizer bar and Brembo carbon ceramic brakes. These enhancements further highlight model’s high-performance character.

As mentioned, the design philosophy of this concept features lightweight strategy. In particular, the vehicle includes carbon fiber front and rear bumpers, tailgate and inner cargo box. These elements reduce Chevy’s weight with approximately 200 pounds from the 4,503 pounds base curb weight.

The form of the lightweight components was matched with their low-mass function. The carbon fiber front bumper features racing-inspired ground effects styling. There are also carbon body-side ground effects and a carbon fiber tailgate with a spoiler. The hood includes a Camaro Z/28-inspired extractor vent.

Furthermore, in terms of weight saving there have been also added Camaro Z/28 Brembo carbon ceramic brakes. To be more precise, their carbon ceramic-matrix rotors are much lighter than conventional steel rotors. The result is saved un-sprung weight, enhanced driving performance and more immediate and direct handling.

The truck runs on charcoal-painted 19-inch Camaro Z/28 aluminum wheels and high-performance tires that definitely contribute towards its powerful stance on the road. What is more, in the Cheyenne are removed the trailer hitch, spare tire, interior center console and some of the sound-deadening material. The truck also adds lightweight aluminum driveshaft and composite rear leaf springs.

The performance of this Chevrolet is spectacular due to the EcoTec3 6.2L V-8 engine that it is equipped with. It produces 420 horsepower (309 kW) and 623 Nm (460 lb-ft) of torque. A Borla performance exhaust system complements the 6.2L’s output.

The powerful unit is coupled with a production six-speed automatic transmission, which includes hill descent control, as well as fuel-saving electric power steering and StabiliTrak electronic stability control with hill start assist.

The interior of the truck was also given a touch. It includes Recaro sport seats and a flat-bottom steering wheel. As an option, there are available safety features such as lane departure warning, front and rear park assist and a rear-vision camera.

All production Silverado models are made with fully boxed frame which is the foundation for their strength and capability. The main rails and major cross members are made of high-strength steel which delivers rigidity and optimal hauling capability.

Source: Chevrolet

Toyota JPN Taxi Concept To Debut At Tokyo Motor Show

Toyota JPN Taxi Concept is Toyota’s vision for a new generation of Japanese taxi, which will be officially unveiled during this year’s Tokyo Motor Show. The event will have its beginning on 20th of November.

Despite the fact that there’s no “for hire” sign yet which is projected on the blue display panel above the windscreen, it’s been conceived by the brand in line with the Japanese government’s programme for designing buses and taxis that are more user-friendly.

As one can see from the pictures, the vehicle has unique proportions which are designed in order to be in complete harmony with the urban lifestyle. In addition it is extremely agile and offers ease of access for passengers, especially children and older people.

In particular, JPN Taxi Concept has a high cabin, low floor and electric sliding door that will deliver effortless utilization. In addition, the car comes with a new powertrain, namely – the LPG hybrid system. The latter is promised to offer great eco-friendly characteristics.

The seats in the cab are five and it is equipped with a large interior monitor showing passenger information including the route to the destination and the fare.

Source: Toyota

DMC Lamborghini Aventador LP720 50th Anniversario by Jackson Moore

2014 Lamborghini Aventador LP720-4 50 Anniversario Edition was revealed in April and it was designed and built in order to celebrate the 50th anniversary of the famous luxury sports car brand. Its design was almost perfect because it lacked something very typical for every sports vehicle – the wing.

The unique design of the body of the car definitely “screams” for a wing. The luxury tuners at DMC have a solution for this problem and have equipped the 50th Anniversarion with DMC‘s Molto Veloce spoiler, and then engaged the photographer Jackson Moore to make some stunning photoshoots of the vehicle.

Unquestionably DMC’s wing seems to magically achieve what the stock car was asking for, thus giving the production LP720-4 a complete look. However, the tuners did not make any particular modification regarding the performance, hence the supersports retains its production characteristics.

This Lamborghini is equipped with a 6.5-liter V12 engine and it is capable of producing a total of 710 hp (522 kW). This means an effortless acceleration time estimated at 2.9 seconds for the 0-100km/h (62mph) sprint. The top speed is 350km/h (218mph).

Source: DMC

Second Teaser Of New Generation Nissan Qashqai Revealed

2014-Nissan-Qashqai-Second-Teaser-HTUMB This week the Japanese automaker Nissan will reveal the next generation of its Qashqai model. The full reveal of the vehicle will happen on 7th of November. The brand has released the second teaser image of the crossover leader, showing its front end design.

Nissan promises to take the crossover sector into dimensions by raising the standards, including more innovations and offering expanded levels of luxury treatment. As one can see via the picture, the MY2014 Qashqai has flowing design lines that start from the hood, continue to the front fascia and then go around the grille.

From the impression we get, this design definitely gives Qashqai sportier look. This image is additionally emphasized by the headlights which will probably feature as standard integrated LED daytime running lights. What is more, the released teaser also shows that on the lower bumper will be integrated fog-lights.

We are undoubtedly eager to know more about the 2014 Nissan Qashqai but we have to wait just few days when its full reveal will happen.

Source: Nissan

Debut For Lexus LF-NX Turbo SUV Concept At Tokyo Motor Show

Lexus_LF_NX_concept_THUMB At the 2013 Tokyo Motor Show which will start from 20th of November and will end on 1st of December, the luxury brand Lexus will make the world premiere of Lexus LF-NX compact crossover SUV concept. The event will take place at Tokyo Big Sight in Koto Ward.

The LF-NX concept made its official debut earlier this year at the Frankfurt Motor Show. The new mid-size crossover concept will probably be included in the future model range. It has been outfitted with a newly-developed 2.0-liter turbo engine which delivers power and improved fuel economy.

The sportier look of the vehicle is not only ensured by the rugged forms and its aggressive stance, but also by the lower center of gravity, highlighted even more by the front under spoiler. Lexus’ new crossover concept has a lean profile, compact and sharp body and bold tires matched with unique wheels.

Everything in the design of this SUV speaks about unique power and an exciting drive. Inside, the new remote touch interface with touchpad functionality provides an advanced, user-friendly experience unique to the brand.

Source: Lexus

Toyota Dream Build Challenge Let’s Go Moto Tundra

The last vehicle to compete in Toyota Dream Build Challenge is called Let’s Go Moto Tundra. It was created as a result of the collaboration between two motocross athletes – Josh Grant and Justin Brayton and Toyota.

The modified Tundra is the ultimate desert sports machine. With some help from JGRMX and N-FAB, this Toyota vehicle now has expandable electronic awnings and TV screens, along with all motocross gear and attitude.

As one can see the size of this Tundra is very unusual. The team kept the front half of the 2014 Tundra with a CrewMax cabin and swapped in an 8-foot long truck bed from another Tundra. In addition, there was added a custom-built metal box that serves in terms of accommodation of the length of a motocross bike, plus three TV screens on doors that swing open.

To be more precise, one of the TVs plays off a game console so the riders have entertainment between competitions, while the second one can play DVDs and a third – bike engine diagnostics. For the functionality of the truck contribute a fridge, power washer, helmet dryer and space for tools, back-up gear and hydrogen tanks.

At last, the entire vehicle was lifted from the ground by nearly 12 inches to handle the rugged desert terrain. The two Team Toyota athletes and their partners had only seven weeks in this year’s Toyota Dream Build Challenge to modify a vehicle and make it unique.

The winner will be announced on 5th of November at SEMA Show. To win, Grant and Brayton must score the greatest number of votes among the other competators: the freestyle skier Simon Dumont with partner Oakley with the Ultimate Dream Ski 4Runner; BMX rider Drew Bezanson with partner Skullcandy and the 2014 Corolla tuned for performance and NASCAR driver Parker Kligerman with partner Kyle Busch Motorsports, who transformed a 2013 Camry into a rally car.

$Toyota Dream Build Challenge Let\'s Go Moto Tundra$

Video Source: YouTube

Source: Toyota

Kahn Land Rover Discovery Twin Turbo XS RS300

The latest modification in the garage of the premium luxury tuners at A. Kahn Design is the Kahn Land Rover Discovery Twin Turbo XS RS300 look for practicality and style.

The Land Rover received a makeover and now it is capable of setting a fashion statement in every sense. The contributor for this is the aggressive looking styling package, which now adorns the Discovery.

To be more precise, the package comprises of RS Front Grille with 3D mesh, 9.5 x 22 and 10.5x 22” RS-R wheels at the front and rear respectively, RS vented front and rear air dams, brake calipers finished in liquid red, privacy tinted glass, door entry sill plates in stainless steel, front wheel arch LED light strips and Kahn enamel tailgate logo and wing shield branding.

Kahn’s interiors are always a masterpiece. No exception is the modified interior design of this model. The bespoke touch includes front, middle and rear seats in quilted and perforated black and red leather, clock bezel surround finished with Swarovski Diamonds, colored rev counter dial and four door armrest stitching.

But there is more – one can also see throughout the coupe Kahn red enamel key ring with Kahn logo, diamond quilted centre glove box, time clock facia insert, floor mats, vented foot pedals in machined aluminum, and santoniri black colour change. This tuning is definitely for connoisseurs and it is worth the attention in every aspect.

Source: A. Kahn Design

Toyota Dream Build Challenge Ultimate Dream Ski 4Runner [VIDEO]

Toyota Dream Build Challenge Ultimate Dream Ski 4Runner is the third entry in Japanese brand’s competition and its design is focused on freestyle skiing. In fact, it is all about the cold weather.

For this project, Toyota has partnered with the athlete Simon Dumont and Oakley in order to enhance the 4Runner and make it more aggressive than ever but also to equip it with varios comforts.

The Ultimate Dream Ski 4Runner has an oversized front grill work, a dark Oakley camouflage-patterned vehicle wrap, LED lights and a rugged, metal roof rack designed to electronically lower and open to store two sets of skis.

In terms of comfort, this vehicle adds customized experience, thanks to the doors, music, windows and other interior features which are being controlled by three separate iPads. Inside, there is also a coffeemaker, a dryer for each glove and boot and a mountable grill stored in the rear cargo area.

Dumont is a Team Toyota member, and is one of the best freestyle skiers in the world who will compete in the 2014 Winter Olympics. His custom ride is one of four entries in this year’s Toyota Dream Build Challenge.

Source: Toyota