Senner – Automobiles Review

Senner Tuning Gives Audi A8 Additional 76 Horsepower

Audi A8 has always been one of the most luxurious and desirable cars, since it was introduced to the automotive market. In fact, according to a recently published study, the A8 is the ultimate dream car for Germans. But even these facts can’t keep the tuners at Senner Tuning from exploring the optimizing potential of this Audi. The particular car on which they have worked is the 4.2 litre V8 model.

The external modifications include the exchange of the standard wheels for Oxigin14 Oxrock rims in the “Black Full Polish” finish. They come in the format 10×22 inch all round and are coupled with Continental Sport Contact 3 tyres in the dimensions 265/30R22. The standard air suspension has been lowered via DLC lowering module from KW. Due to the utilization of a WLAN module, the lowering of the air suspension can be individually adjusted using an iPhone application.

As mentioned, the A8 is powered by the 4.2 litre V8 engine, which produces as a standard 321 horsepower (236 kW) and 445 Nm (328 lb-ft) of torque. Here, Senner Tuning found the optimization potential and increased the power to 397 hp (292 kW). In addition, the maximum torque number also got bigger to the 477 Newton meters.

The tuners has spotted an interesting side effect after the performance increase: in spite of this additional performance, the A8 uses on average between 1.5 and 2.0 litres less petrol per 100 km. At last they have rounded the performance intervention by two new sport air filter inserts and a power converter.

The exhaust gases are processed by an in-house stainless steel exhaust gas system, which features a presilencer with a 100 mm end pipe to the right and left. The exhaust system has an EU operating permit (ABE) and produces great sound. The final step was to give the luxury car red painted brake calipers and LED number plate lighting.

Source: Senner Tuning

September 17, 2014

Senner Tuning Audi RS5 Coupe Produces 504 Horsepower

Senner Tuning Audi RS5 Coupe has a cowl which hides a classic booming V8-motor with a displacement of 4.2 litres and a 504 horsepower (370 kW). Which means an addition of 54 hp to the serial power. The updated maximum torque is 478 Nm (353 lb-ft). The tuners have also repainted the car and it now boasts “Daytona grey” paint finish. Furthermore, the RS5 got also a Bilstein B16 PSS10-coilover suspension in which the push and pull stage dampening can be adjusted separately.

In addition, the DRC- & RC function of the serial undercarriage was deactivated when the new one was installed. The restyled Audi RS5 runs on Competec C.01 three-part wheels in high-gloss black. The front has a 9.5×20 size with a bed of 2.5 inches and the rear a 10.5×20 size with a bed of 3.5 inches.

Then the wheels were covered with Continental Sport Contact 5P-tyres in the 255/30R20 and 295/25R20 for the front and rear, respectively. The exhaust has been treated by the in-house sports exhaust system with pre-muffler and backpressure-optimised flap control. There are three different modes available: travelling, sports and racing.

The serial chrome end pipe covers were added, and coupe’s body was also slightly modified and now includes signal yellow car body elements. Chrome edgings covered in glossy black film around the widows, while the side mirrors were painted in black. In black were desided also the grille, the rear spoiler and both Audi rings at the front and rear.

Source: Senner Tuning

June 19, 2014

Audi S5 Sportback By Senner Tuning

Senner Tuning Audi S5 Sportback is more than a high-performance coupé limousine. It carries a sportive gene and is craftily packaged in gorgeously formed bodywork. One can see that Senner Tuning endowed the S5 Sportback with an interesting optical and technical package. Firstly, the tuners added exclusive Work Schwert SC1 rims in chromium-silver finish as well as high-gloss anodized outer rims. The rims in front are in the size of 9×20 inches and include 91 millimeter-wide outer rims. They were fitted with with Continental Sport Contact 5P tires of the dimension 245/30R20.

At the rear, high-grade Work wheels were added of the size 10.5×20 inches and 100 millimeters outer rim. The tyres here measure 295/25R20. Next, the tuners mounted KW variation 3 coilover kit thus achieving optically impressive lowering with an adjustable rebound and compression damping.

The perfomrnace of this Audi was also improved. The overall power of the V6 compressor engine was enhanced from 333 hp (245 kW) to 446 horsepower (328 kW), while the torque – from 440 Nm (325 lb-ft) to 511 Nm (377 lb-ft). The optimization was made via an engine software. The top speed is now 300 km/h.

Furthermore, there was also added a power converter for the elimination of the electronic drag moment during throttle response. On the other hand the Injen Cold Air Intake system including power pipe – black edition, contributes for the improved ventilation of the drive unit.

Next, a specially manufactured valve-type sports exhaust system with a control system of the exhaust valves is regulated on the basis of load status-dynamic pressure. It also takes charge of processing the high-grade exhaust gases.

Senner Tuning has also supplied the vehicle with a radio remote control system. The latter facilitates the individual switching of the valve control system between three different modes: travel, sports, race. This basically means that driver is able to adjust the volume of the system individually.

Source: Senner Tuning

April 29, 2014

Senner Tuning Audi RS5 Cabriolet – 504HP and 478Nm

Senner has presented their latest tuning project based on the stylish and powerful Audi RS5 Cabriolet. It delivers sensational feelings: wind in the hair, brutal noise and acceleration!

The exterior is quite aggressive and features a carbon fiber rear spoiler and a set of 20” mbDESIGN KV 1 wheels fitted with Dunlop Sport Maxx GT tires. There is also a carbon ceramic brake system at the front and an adjustable KW coilover suspension improving significantly not only the stance, but handling as well. Last, but not least is the new roof module, which can open or close the roof at speeds up to 60 km/h (37 mph).

The 4.2 liter naturally aspirated V8 is boosted to 504HP (371 kW) and 478Nm (352 lb-ft) of torque – an increase of 54HP and 48Nm. The result is thanks to an optimized ECU and a sports exhaust system. 0-100 km/h in 4.2 seconds and a top speed of 300 km/h (186 mph).

The tuning package starts from €14,900.

Source: Senner

March 20, 2014

Senner Bling the Nissan Juke Nismo

2013-Senner-Nissan-Juke-Nismo-shadow

Senner pride themselves with their work on various Nissan 350Z and 370Zs. But anything that’s worthy of the attention of Nismo is worthy of the attention of Senner. Enter the Nissan Juke Nismo – an already vicious powerhouse of aggressiveness, sportiness and testosterone.

The first thing you might notice about the Senner Juke is the prevailing black and white. It is an especially pronounced theme on the Oxigin Oxrock 14 wheels with a “white-wrap-refinement” on the rim well. We wouldn’t call it refinement though. Too flashy for our liking. The sizes: 9,5-inches wide, 20-inch diameter fitted with Continental Sport Contact 5P 255/30 tires. The whole vehicle also sits 35 mm lower to the ground with Senner’s springs

Senner haven’t really tried to improve on the Nismo aerodynamic package. Instead, they have went for small accesorizing – wind deflectors on the side windows, LED daytime running lights, LED license plate illumination and, of all things, Philips Silver Vision chromium flashing indicator bulbs.

Now to the more serious stuff. The Juke’s 1.6-liter engine has received a boost in power because of some witchcraft with the electronics and because of the brand new INJEN-Cold Air Intake module. That’s 225 hp (as opposed to 200 hp) and 275 Nm of torque (as opposed to 250 Nm).

For the appropriate soundtrack, Senner have thrown in their custom made stainless steel exhaust system with ridiculously wide end-pipes.

The whole thing, provided that you already happen to own a Nissan Juke Nismo, will cost you around $12,222. We can’t say if it’s worth it or not.

Source: Senner

November 27, 2013

Senner Tuning Adds More Carbon To The Audi S5 Coupe

Senner Tuning has refined the 2013 Audi S5 3.0 TFSI coupe with facelift thus giving it more impressive on road stance, muscular posture and better performance. First of all, at the front is visible a new combination of RS front apron with an RS5 radiator cowing including black emblem and number plate fitting.

In addition, the tuners have given this Audi a carbon fibre elements which are decided in the color flash red, and can be seen in the large air inlets of the front aprons, the housing of the external mirror as well as the filigree side skirts.

At the rear, the rear spoiler flap and the rear screen cover are in the original colour of the car. The counterpart of the front apron is in the rear side contained in the rear apron insert in an RS5 look. The number plate is illuminated by bright LEDs.

Other highlights here include the two-part welded Work Varianza T1S alloy wheel rims which light up in flash red, in sizes 9×20 inches at the front and 10.5×20 inches at tthe rear. They were matched with Vredestein Ultrac Sessanta tyre of the dimensions 245/30R20 and 295/25R20 for the front and rear respectively. Additionally, the KW coilover kit of variation 3 that was added ensure a perfect fitting of the wheels in the fender.

But the transformation does not end here. Senner Tuning has also taken care of the powerplant under the hood of the S5 – the supercharged 3.0 liter TFSI V6. Next to the new two-part carbon cover of the driving mechanism, the professionals have done an installation of an Injen cold air intake which features power pipe (Black Edition).

Through an electronic power booster, now the air suction system delivers a peak performance of 446 horsepower (328 kW) and a maximum torque of 511 Newton meters (376 lb-ft). And via a software optimisation, the electronic clog was deactivated.

Moroever, a power converter also sharpens the characteristic lines of the electronic gas pedal. This results in rendering of the power of the engine. The adapted RS5 exhaust system with valve control that is connected to a flow-optimised downpipe ensures a thrilling sound. This exhaust system was optically finished in the black RS5 end pipe covers.

The interior was also given a treat via a carbon fibre in black which contrasts the red-black bi-coloured Nappa leather fitting and decorates the dashboard, centre console, RS5 door handles and the sports steering wheel. A stainless steel pedal set in the basement floor including foot rest and soft velour car mats with leather are other visible elements insde.

Source: Senner Tuning

September 26, 2013

Senner Tuning Nissan Juke Nismo

Senner Tuning has introduced their version of Nissan Juke Nismo. The crossover comes with styling and performance upgrades. The name of the project is Juke Sport Box.

The exterior boasts a set of Barracuda Tzunamee rims – 9J x 20” fiited with 255/30 R20 Vredestein Ultrac Sessanta tyres. There are also 35 mm lowering springs, candy red carbon fiber mirror caps and Philips Silver Vision Chromium lights and a PDC (park distance control system).

The 1.6 liter turbocharged petrol is boosted to 225HP (165 kW) and 275Nm (202 lb-ft) –an increase of 25HP and 25Nm. The result is thanks to a high-flow air filter, an optimized ECU and a stainless steel sports exhaust system.

The price of the new vehicle including extra equipment and tuning is €37,650.

Source: Senner

August 20, 2013

Senner Tuning Reveals Upgraded Audi A6 4G

The production Audi A6 can deliver 313 horsepower (230 kW) and develop the impressive torque of 650 Nm (480 lb-ft). This amount of power is due to its 3.0l Tdi engine. However, the specialists at Senner Tuning weren’t satisfied with these figures and had something in mind in order to offer even better driving pleasure are more power.

Therefore they have created for this Audi model a comprehensive tuning program. The result of it is an increase in power of up to 374 hp (275 kW) which was achieved via power boosting of the type Stage 2. The torque was also enhanced and it is now estimated at 776 Nm (573 lb-ft).

What is more, this amount of power had to be transmitted on the road via a proper way; there shouldn’t be any significant loss of drive. For this reason Senner Tuning constructed a classical KW Street Comfort coil-over kit with a lowering section between 30 and 55 mm.

The German Tuners also added two work rims in their official program as adequate wheel/tyre combination. The choice is either the Varianza T1S wheel or the Sword SC1. What is similar between them is that both are black front-polished rims and have external beds that are anodized to high-gloss.

The two-part wheels are in size 9.5×20 inch and are matched to Vredestein Ultrac Sessanta tyres in size 255/35 R20. At last, the tuning program is finished by a sport air filter, a power converter for the electronic gas pedal and an adapted auxiliary heating system from Eberspächer of the type Hydronic II with iPhone control system.

Source: Senner Tuning

August 6, 2013

Senner Nissan 370Z Roadster

Senner Tuning has announced their latest project based on Nissan 370Z Roadster. The sports convertible comes with styling and performance upgrades.

The exterior boasts a front spoiler extension and a boot lid spoiler. There is also a set of 20” Work Varianza T1S alloy wheels fitted with Continental Sport Contact 5P tires. The tuner has installed an adjustable KW 3-Inox coilver suspension for perfect stance and improved handling. Various carbon fiber elements for the interior can be ordered. Senner offers dashboard cover, door handles, additional instruments for the A-pillar displaying the oil pressure and the exhaust temperature. There is also a bespoke multimedia system developed by Audiotyme and an enormous sub-woofer in the trunk.

The 370Z is powered by a 3.7 liter naturally aspirated V6 boosted to 368HP () and 406Nm of torque. This is an increase of 38HP and 40Nm thanks to a new sports exhaust system with a fan-type pipe, 400-cell sports catalysts, a front muffler and X-pipe. There is also an INJEN CAI (cold air intake) system and an ECU re-map.

Source: Senner

July 23, 2013

Senner Tuning Audi S5 3.0 TFSI Convertible – 435HP and 501Nm

Senner Tuning has announced their latest project based on Audi S5 3.0 TFSI Convertible. The sports car comes with improved performance and styling.

The exterior boasts an RS5 front grille, four-pipe sports exhaust system with valve control, new fog lamp covers, a new rear apron insert and mud guards. The stance is improved thanks to a set of Bilstein B16 coilover kit and a set of enormous 20” Work VS-XX matte black alloy wheels fitted with Continental Sport Contact 5P tires – 255/30 R20 front and 295/25 R20 rear.

Senner S5 Convertible is finished in nice glacier white metallic paint. The interior boasts glossy speedometer cover, RS5 sport pedals and a DVD system.

The 3.0 liter V6 received a full supercharger system boosting the power to 435HP (320 kW) and 501Nm (371 lb-ft). This is an increase of 102HP and 61Nm.

Source: Senner

June 27, 2013

Mercedes-Benz SLS 63 AMG Roadster Enhanced By Senner Tuning

The next tuning for the day is by Senner Tuning which have modified a Mercedes-Benz SLS 63 AMG. Now, even more than ever, the sight of this gorgeous sports vehicle triggers goose bumps in every car enthusiast.

The tuning specialists based in Ingelheim Germany have equipped this Mercedes-Benz with a small but nice tuning programme which ensures that the one behind the steering wheel will stay noticed wherever he or she goes. To be more precise they have added a special coil-over suspension system of variation 3 from KW Automotive.

In addition, the AMG front rims are replaced with a set of Schmidt Gotham-aluminium ones in titanium gray. They are in dimensions 9 x 20 inches with 255/30R20 and in the rear in 11.5 x 21 inches with 295/25R21 Hankook S1 Evo-tires in the front.

The serial SLS generates 571 horsepower (420 kW) and has a maximum torque of 650 Nm (478 lb-ft). Of course, the german customization professionals boosted the power of the AMG top model by 35 hp (26 kW) and the maximum torque by 40 Nm (30 lb-ft).

They have acheved this through core area adaptation and a precise adaptation to the new exhaust system and the installation of a set of high-performance air filters. In fact, the new exhaust system is made of sophisticated high grade steel and it is fitted with a valve control system. The latter includes a back pressure monitored control system for individual sound volume adaptation with four different modes.

Source: Senner Tuning AG

March 21, 2013

Senner Tuning 2012 Audi S5 Coupe

Senner Tuning has presented their latest project based on the facelift version of Audi S5 Coupe. The tuning company aimed the vision of the flagship RS5 model.

The S5 Coupe is finished in ibis-white paint and has a new front spoiler in RS5 design with original RS5 air intakes as well as fitting an original black RS5 radiator grille. At the rear, Senner added a window spoiler and a restrained boot lid spoiler element. There are also side skirts finished in carbon-fibre. The characteristic Audi rings on the front and rear of the vehicle have been retained in black, and Senner Tuning have placed ‘Supercharged’ badges on the front fenders to give a little something extra. The vehicle’s number plates are illuminated by bright white LEDs.

The rido rolls high-quality Work VS-XX light-alloy wheels with black-coloured anodised star-shaped rims and mirror-finish anodised outer rims. The dimensions are 9J x 20”at the front and 10.5J x 20”at the rear fitted with tein Ultra Sessanta tyres of size 245/30 R20 and 295/25 R20, respectively.

The suspension received a full coilover kit from KW ensuring firm control while cornering at the same time as a smooth ride and great driving comfort.

The 3.0 liter V6 TFSI engine can be boosted from 329HP (242kW) to 429HP (315 kW) and from 440Nm (326 lb-ft) to 501Nm (371 lb-ft). Thanks to the removal of the electronic Vmax (maximum speed) blocker, Senner Tuning’s Audi S5 can fully convert its enhanced performance into forward drive and top line speed.

A four-pipe RS5 exhaust system extending from the catalytic converter, including a downpipe and exhaust flaps, ensures the Audi S5 makes a truly awesome sound.

The interior boasts bicolour fine Nappa leather trim in black and magma-red with contrasting colour stitching either. There is also an interior set from coarse-mesh 600 carbon-fibre, an Audi R8 sports steering wheel, RS5 door handles, including illumination units. A DVD system can be activated to enable DVDs to be shown while driving.

Senner Tuning is offering a special price of €69,990 for this particular car.

Source: Senner Tuning

November 8, 2012

Tag: Senner