Automobiles Review

Tag: render

  • Skoda Four-door Coupe [render]

    X-Tomi Design has published a very good render picture of a possible compact four-coupe from Skoda. It is named Garde by the designer and is based on the VisionC, which was fully revealed by the Czech company during the 2014 Geneva Motor Show.

    Skoda didn’t confirm any production model, but there are big chances that it could be introduced next year as MY2016. The new stylish four-door coupe will be slotted between the Octavia and Superb in the company’s lineup. There is no doubt that it would be a lot appreciated, because the company offer only “normal” vehicles for now.

    It is expected to ride on the same MQB platform as the Octavia, so the engine range will be taken directly from it. In other words, there will be power units from 86HP (63 kW) with 1.2 liter TSI engine to the decent 220HP (162 kW) in the RS variant powered by 2.0 liter TSI engine. The new 1.4 liter TSI engine with 110HP (81 kW) will be also offered. It meets the EU6 regulations and runs on CNG (compressed natural gas) with consumption of just 3.4 kg / 100 km with corresponding emissions of 91 g/km of CO2.

    Actually, Skoda had Garde in the in their range, but approximately 30 years ago. This was a rear-engined, rear-wheel drive car with 1.2 liter engine and a 4-speed manual transmission.

    Source: X-Tomi Design

  • BMW X7 [render]

    TheophilusChin has published two interesting render images of the upcoming BMW X7. The flagship looks pretty much as an enlarged X5 F15 and the rear reminds its direct rival – Mercedes-Benz GL-Class. It is expected to hit the market sometime in 2017 or 2018, but nothing is for sure.

    BMW strongly reject to release any information about the possible model. It will probably come with a new engine range also including a hybrid version. Of course, fully-electric model is not excluded from the plans.

    BMW X7 will be manufactured at the company’s Spartanburg (SC) plant, where the most expensive car brand in the world will invest over $1,000,000,000.

    Until then, we expect to see how the new X5 eDrive will perform in the real world. It features a TwinPower Turbo four-cylinder petrol engine and an electric motor with 95HP (70 kW). The expected range is up to 30 km (19 miles) only on electricity with speeds of up to 120km/h (75 mph). The fuel consumption will be around 3.8 liters / 100 km (61.8 mpg US) with CO2 emissions of less than 90 g/km.

  • Audi TT RS [render]

    X-Tomi Design has published an awesome render picture of the upcoming Audi TT RS. It is extremely aggressive, but in the same time carries the unique style of the latest Audi cars. The recently announced 3rd generation of TT has already get an S version, so it is quite possible the German manufacturer will make a super-powerful RS model.

    Still, it is quite early for the top-of-range model, but the RS will basically look a lot like TT-S. To match the aggressive exterior, the TT-RS will come with an improved 2.0 liter TFSI engine with around 400HP (294 kW) compared to the 310HP (228 kW) and 380Nm (280 lb-ft) of torque power unit in TT-S.

    Of course, Audi TT RS is expected no sooner than 2015, which will be followed by even more spectacular version – TT RS Plus coming sometime in 2016.

    The TT range will be joined by Audi TT Offroad production model with a hybrid powertrain including a  four-cylinder 2.0 liter TFSI working together with two electric motors. The combined output is 408HP (300 kW) and 650Nm (479 lb-ft). 0-100 km/h in 5.2 seconds and a top speed of 250 km/h (155 mph). The Plug-in hybrid is able to cover 50 km (31 miles) in electric mode.

  • 2015 Mazda MX-5 [render]

    Mazda MX-5 is the best-selling roadster in the world and it is time to get an all-new look. Still, the manufacturer didn’t reveal any information or pictures of the upcoming 2015 Mazda MX-5. Until then, here is a nice render picture of the next generation MX-5 created by Theophilus Chin.

    2015 Mazda MX-5 will be smaller and lighter compared to the outgoing model. The weight reduction will be more than 100kg (220 lbs), which means a lot better acceleration, improved fuel economy and superb handling. The new model will also adopt a lower center of gravity making the roadster a lot safer and harder to roll-over.

    The new MX-5 will get Mazda’s Kodo design language, so it will offer a very attractive styling as seen in recent products such as the 6 and 3, as well as the Hazumi Concept.

    Other highlights include more powerful engines in the range and a more rigid body that will also make it safer in case of a collision. Sales of the all-new Mazda MX-5 are expected sometime in the beginning of the next year and the model will probably make official debut in the end of 2014.

    Stay tuned!

  • Volkswagen Jetta CC [render]

    TheophilusChinhas published two render pictures of Volkswagen Jetta CC based on the recently introduced the new midsize coupe – NMC Concept. The changes are not significant, but the Jetta CC definitely looks better.

    NMC Concept was exhibited a few days ago at the 2014 Beijing Motor Show. The Jetta CC comes with different front bumper, rear diffuser and taillights, while the smaller wheels will be more suitable for production model. They will also improve the comfort. Although a Jetta CC is rumored, Volkswagen didn’t release any official information about this model. According to recent report, the NMC Concept previews a production model set ride on the next-generation Jetta platform. It will utilize the MQB platform and is expected to see the be introduced sometime in 2016.

    Volkswagen US has recently unveiled the 2015 Jetta Facelift, which is expected to make official debut  at the 2014 New York Auto Show. The new Jetta Sedan has some styling changes for the exterior and the interior. The engine range is also updated as well as the optional equipment.

    2015 Volkswagen Jetta Facelift US still rides on the PQ35 platform (Golf V), but the engine line-up now features a four-cylinder 2.0 liter TDI with 150HP (112 kW), which 10HP more. It will return 32 mpg US in city, 45 mpg US on the highway and 37 mpg US on combined cycle.

  • Porsche Boxenne S [render image]

    Here is a nice render image of Porsche Boxenne S, which is a mixture between the recently announced Macan crossover and Fiat 500. The hardcore fans of Porsche will curse it, but as the market demands these days, the Boxenne could be a real hit.

    The render image is published by X-Tomi Design, who obviously has some very nice ideas. The small affordable Porsche Boxenne will never happen, but it will be surely appreciated. Still, we think that it will be better, if Porsche announce smaller model than Cayman. A direct rival of Lotus Elise and Alfa Romeo 4C will be very interesting.

    If Porsche produces a smaller version of Macan, it could be fitted with some powerful engines. For example the Macan S is powered by a 3.0 litre V6 bi-turbo engine – 340HP (250 kW) and accelerates 0-100 km/h (62 mph) in 5.2 seconds. A 7-speed double-clutch transmission transfers power to AWD system. The top speed is 255 km/h (158 mph), and its NEDC fuel consumption figures are between 31.4 and 32.5 mpg, which corresponds to CO2 emissions of between 212 and 204 g/km. All these figures will be drastically improved, if the weight is lowered as well as the improved aerodynamics.

    Imagine what will do the Boxenne S with the same engine!

    Source:x-tomi design

  • Cadillac ATS Convertible [render]

    Design RM has published a render picture of possible Cadillac ATS Convertible. Pretty much, the studio chopped the roof of the already announced 2015 ATS Coupe. Even though the ATS Coupe is not so popular as expected, may be a drop-top version will be more tempting to customers.

    The render picture kept the stylish lines of the coupe, but with removing the top it adds a unique look. The rear end is practically identical with the exception of the GPS antenna, which now sits on the rear boot lid.

    The engine range will be the same as the coupe’s – a 2.0 liter turbocharged petrol – 272HP (203 kW) and a 3.6 liter V6 – 321HP (239 kW) and 373Nm (275 lb-ft).

    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe
    2015 Cadillac ATS Coupe

  • Ford Mustang Mach 1 [render]

    Ford is probably going to produce a special Mustang Mach 1. However, nothing is confirmed that’s why so Top Speed has created several renders of that possible model.It is inspired by Mustang Boss 302 and Mach 1 comes with new front grille and an adjustable front splitter improving the aerodynamics. There are also special alloy wheels, some body side graphics, a bigger rear spoiler and a four tailpipe sports exhaust system.Some of the performance highlights include a sport-tuned suspension, improved interior and a 5.0 liter V8 engine – 420HP (313 kW) and 528Nm (390 lb-ft) of torque.

  • 2015 Jaguar XS render

    RM Design has published a render picture showing the upcoming entry-level sedan from Jaguar – the XS. It is set to debut in 2015, when it will go against some of the best-selling models in the world – Mercedes-Benz C-Class, BMW 3-Series and the new Audi A4.

    The XS is slotted below the XF, which means that it will be cheaper, smaller and less powerful. Still, it is a Jaguar and it will have its own personality and spirit.

    The engine range will include different four-cylinder 2.0 liter petrol and diesel engines as well as a powerful 3.0 liter V6 diesel and a 3.0 liter V6 supercharged petrol with around 340HP.

    The manufacturer also plans to expand the line-up with coupe and estate derivatives.

    Stay tuned!

  • 2015 Lamborghini Cabrera Spyder [render]

    Gtspirit has published a render picture of the upcoming 2015 Lamborghini Cabrera Spyder. The image is created by Evren Milano, who replied to Wild Speed’s Cabrera render. The new Lamborghini Cabrera Coupe will be presented sometime during next year followed by its roofless variant in 2015.

    Both will be powered by an updated 5.2 liter naturally aspirated V10 with 600HP (447 kW). The engine is mated to a dual-clutch 7-speed transmission. 0-100 km/h in around 3.2 seconds and a top speed of over 300 km/h (186 mph), while the Cabrera Spyder will be slightly slower, because of the additional weight.

    The Cabrera will be made aluminum, with carbon fiber and other composites used for maximum weight saving. The chassis will be shared with a 2nd generation Audi R8.

    Source: gtspirit.com

  • 2015 Lamborghini Cabrera [render]

    Wild Speed has published several render pictures of the upcoming Gallardo successor – the Cabrera. 2015 Lamborghini Cabrera will hit the market sometime in late 2014.The Gallardo replacement will have some of Aventador’s features as well as few hints of Sesto Elemento. The engine will be a 5.2 liter naturally aspirated V10 with 600HP (447 kW) mated to a 7-speed dual-clutch transmission. 0-100 km/h in 3.2 seconds and a top speed of over 300 km/h (186 mph).The Cabrera will be made aluminum, with carbon fiber and other composites used for maximum weight saving. The chassis will be shared with a 2nd generation Audi R8.You can check the link below for additional renderings of 2015 Lamborghini Cabrera.

  • 2015 Audi R8 [render]

    Here is another interesting render picture of the upcoming 2015 Audi R8. The image is created by Lutz Valdeig, who imagined the model in a nice cherry red paint exterior scheme with contrasting aluminum details.The manufacturer has confirmed the launch of the 2nd generation R8, but didn’t release any further information or pictures, that’s why there are a lot of speculations and pictures of it. Nanuk Concept was introduced at the 2013 Frankfurt Motor Show and we expect that a lot of elements will be shared in the new Audi R8. However, Lutz distances its version from the Nanuk concept. The car will feature a lightweight technology, so it should drop its weight below 1,500 kg (3,300 lbs).The expected engine range will include a 4.2 liter V8 and a 5.2 liter V10 with additional  25HP, Start/Stop and cylinder deactivation technology, which will improve the fuel consumption up to 10 %.