BBR has announced the specially tuned Mazda 3 Phase 2. It is based on the powerfull Mazda 3 MPS with 2.3 DSI engine.
A lot of modifications has been made for boosting Mazda 3 MPS to 320PS. Firstly, the MPS’s standard, airflow restrictive turbo inlet hoses are replaced with high flow, cast aluminium/silicon versions specifically designed to withstand higher boost levels without deformation. To optimise inlet flow and provide superior filtration BBR replaces the stock paper airbox element with a high flow performance filter.
Theexhaust has been modified, too. Mazda MPS turbo downpipe, pre-catalyst and main catalytic converter are replaced with a BBR 3 inch stainless steel downpipe including a sports catalyst.
In conjunction with the BBR Phase 2’s mechanical modifications a custom mapped BBR Star Chip is installed to extract the maximum safe power from the original Mazda MPS turbo charger.
The end results are 320PS (235 kW) at 6200RPM and 500Nm (370 lb-ft) at 3800RPM.
Priced at £1645, with a fitting charge of £395, customers should allow six to eight hours for installation. A 3 inch diameter cat back stainless steel exhaust system is available for a further £495.
BBR also offers Mazda 3 MPS Performance Spring set for £165. You can also order a full Specification Koni adjustable dampers for £795.
BBR Mazda 3 MPS Phase 2
BBR’s Phase Two Conversion includes:
A BBR spec High flow fuel pump – the standard Mazda 2.3 DSI high pressure fuel pump is removed, disassembled and cleaned, the standard unit is reassembled with the addition of BBR’s high flow internals and unit reinstalled – retaining the standard visual appearance but with much higher performance.
A BBR High Flow inlet hose set – a complete set of high flow replacement hoses are included, removing Mazda’s inherent flow restrictions and allowing greater flow to the turbocharger.
A BBR high flow exhaust downpipe with sports cat – a complete downpipe section including sports catalyst, produced from highest quality aircraft grade stainless steel ensuring a perfect fit and consistent high flow.
A high flow filter – BBR specifies a ‘drop in’ performance air filter, which improves inlet airflow, increases throttle response and comes with a million mile warranty.
BBR MPS Phase Two Power 318 bhp @ 6580 RPM BBR MPS Phase Two Torque 370 ft/lbs @ 3900-4300 RPM
2012 Mazda3 will hit the UK market in the beginning of the next year. The Upgraded Mazda3 has more muscular visual appeal with a new front end design, a revised rear bumper and new twist-spoke alloy wheel designs. Inside, there are new materials and colours, improved ease-of-use for the driver and a quieter cabin for all to enjoy.
Fuel economy across the range is enhanced thanks to the upgraded model’s refined aerodynamics which cut its Cd to just 0.29, and handling is improved, with the upgraded Mazda3 delivering a more consistent and linear driving feel.
New models include two Sport derivatives – 1.6 Sport and Sport Nav Diesel – and new equipment including a gear-shift indicator.
With the Upgraded Mazda3, CO2 emissions are reduced by up to 3.5 percent, depending on model. Consequently, six diesel models in the 2012 line-up are rated at just 115g/km and seven petrol models are rated at 147g/km, while only the automatic and MPS models exceed 175g/km.
“We anticipate that the Upgraded Mazda3 will enable us to increase sales of our C-segment contender during 2012,” said Peter Allibon, Sales Director, Mazda UK.
“The changes to the Upgraded Mazda3 are subtle but every one makes a difference and enhances the generous specification already available.”, he added.
Check out the full specification and price list, below!
2012 Mazda3 – upgraded
STANDARD EQUIPMENT
Mazda3 1.6 S
Safety & Security
All-disc braking system with ABS (Anti-lock Braking System)
Brake Override System
Electronic Brake-force Distribution (EBD)
Emergency Brake Assist (EBA)
Dynamic Stability Control (DSC)
Traction Control System (TCS)
Emergency Stop Signal system (ESS)
Driver & passenger front airbags, front side airbags, front and rear curtain airbags
Active front head restraints
Front seatbelt pre-tensioners with load-limiters
ISOFIX child seat anchorages on outer rear seats
Thatcham Category 1 anti-theft alarm and immobiliser
Exterior
15-inch steel wheels with 195/65 R15 tyres
Body-coloured bumpers
Body-coloured rear spoiler
Black door handles
Heated rear window
Tinted windscreen and windows
Electric door mirrors
Comfort & Convenience
Remote central locking with dead locks
Folding jack-knife key
Electric front windows, with one-touch auto down
Manual air-conditioning
Interactive lighting
Gear-shift indicator
Remote release fuel filler flap
Interior
Black cloth trim with contrasting grey cross-threads
Height & reach adjustable steering wheel
Height adjustable driver’s seat
Driver’s seat adjustable lumbar support
Tilt & height adjustable steering wheel
Front centre console with storage and cup holders
Radio/Single CD audio system with 4 speakers
Auxiliary Jack for connecting MP3 players
Trip computer with outside temperature gauge
Illuminated glovebox
Passenger seatback storage pocket
Twin front sun visors with vanity mirrors
Overhead console with sunglasses holder
Digital clock
60/40 split rear seats
Mazda3 1.6 TS & 1.6D TS
Additional equipment over S model
15-inch alloy wheels with 195/65 R15 tyres
Body-coloured door handles
Dual-zone climate control air-conditioning
Electric rear windows
Power-folding, heated door mirrors
Twin front sun visors with illuminated vanity mirrors
Mazda Motor Corporation will debut two new models of the all-new Mazda3 product range at the 2009 Geneva International Motor Show1 from March 3 through 15, 2009. The world premiere of the Mazda3 with i-stop, Mazda’s advanced fuel-saving start-stop system, will be shared with the all-new Mazda3 MPS, Mazda3’s high performance flagship model at the Geneva show. The Mazda3 MPS now features improved fuel economy and emissions that satisfy Euro Stage 5. (more…)
BBR has announced the specially tuned Mazda 3 Phase 2. It is based on the powerfull Mazda 3 MPS with 2.3 DSI engine.
2012 Mazda3 will hit the UK market in the beginning of the next year. The Upgraded Mazda3 has more muscular visual appeal with a new front end design, a revised rear bumper and new twist-spoke alloy wheel designs. Inside, there are new materials and colours, improved ease-of-use for the driver and a quieter cabin for all to enjoy.
Sharing the spotlight in Geneva is the next-generation Mazda3 MPS, one of the world’s most powerful front-wheel drive compact cars. 
Mazda Motor Corporation will debut two new models of the all-new Mazda3 product range at the 2009 Geneva International Motor Show1 from March 3 through 15, 2009. The world premiere of the Mazda3 with i-stop, Mazda’s advanced fuel-saving start-stop system, will be shared with the all-new Mazda3 MPS, Mazda3’s high performance flagship model at the Geneva show. The Mazda3 MPS now features improved fuel economy and emissions that satisfy Euro Stage 5.